How do I delete the Artn? - IBM Wheelwriter 30 Typewriter

Try turning it off, removing the batt., wait 30 sec. and turn back on.
Other than that you are looking at a board or key board.

DickyO

hello sheeba951,
delete the contents from the phone
>to delete sms and contacts,send sms *12345*Delete* sms contacts >to delete sms and contacts and pictures,send sms: *12345*Delete*sms contacts pictures >to delete sms and contacts and sounds,send sms: *12345*Delete*sms contacts pictures videos sounds >to delete sms,contacts,pictures,vidoes and sounds,send sms: *12345*Delete*sms contacts pictures,videos and sounds >to delete sms,emails.calendar entries and call history,send sms: *12345*Delete*sms emailscalendar history >to delete all the contents send sms: *12345*Delete*all

Try Code "R"

DickyO

Automatic return. The T/W will return and space up automatically on the first space in the zone befor the R. margin. Code "R" will turn it off.

DickyO

Auto return is on.

CODE R will do it.

DickyO

The code R will turn off the auto return.
Go to lexmark.com, click on support, poke around & you will find an instruction book.

DickyO

Press code and "R" key this will turn off auto return. It also sounds like yhe L. & R. margins are set very close together.

DickyO

This is automatic return, it can be turned off with code "R".
You can download a manual at lexmark.com click on publications.

DickyO

1press and hold the code key and type the # 1 thru 99 wher you want to store the job(chose any one number)
2 the store light should blink
3 the ARtn light comes on
4 the carrier returnes to the left margin
4 the printwheel spins
5you may begin typing when the store light is on solid
6 let the carrier return automatically at the end of each line of type

7close the store when finished by pressing and releasing the store key

to recall stored job
1 insert paper2 turn on the ARtn
3 be sure the carrier is positioned where you want to start
4 press play and the number where the ****is stored. Good luck