Question about AEG Lavamat W1450 Front Load Washer
Hi i have the same problem code E20 what i did to resolve this matter was i popped down to my shed and got my trusted friend the sledge hammer i unpluged the machine and smashed the hell out of it and went and brought a new machine.........
Posted on Aug 02, 2009
The trouble with that darn E20-error, is that it might refer to any blockage in the water supply. So cleaning the pump is usually a first, but it might also be a blockage in the soap tray (when available), the tap or the hose attached to the tap. Sometimes, it seems most likely that the real cause is somewhere you clean less than the pump.
Hope this helps resolving it.
Posted on Jul 08, 2009
Posted on Feb 04, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
read this site: http://www.askanowner.nl/qa/view.asp?s=2&qid=152459&arrqueryparts=&arrquery=code%3Bce kind regards, w vd vegt
Posted on Aug 28, 2007
Hello. I got error code C9 on a LAVAMAT 86800. It pumped in water, and it pumps out water. You can select pump in or out....But the motor dont turn. It will not sentrifuge. So I bought new carbon brush'es on the net. One of them were totally wore down. Now it works. They lasted for 10 years.
Posted on Feb 05, 2010
SOURCE: What means error code
C9 Indicates Motor Fault. It seems that the Carbon Brushes have Worn out.
Replace it and more likely it would Fix the Problem.Once you replace that, you need to put the machine into Service Mode to Reset the Error.
Steps for Reset the Error Code
1. Press and Hold the Prewash and Soaking Buttons Together.
2. Whilst Holding them, Turn the Dial from Off one Click Anti Clockwise
Note - If problem persists, Check the motor plug for broken wires and check the state of the carbon brushes.
Let me know, if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
Posted on Feb 28, 2010
error code ce is a faulty water distributor fault . you have to replace the top part of the soap dispensor compartment. sometimes you can hear a clicking noise when its trying to operate
Posted on Jul 20, 2010
Testimonial: "Cheers thanks very much, washer now working, great help"
Tips for a great answer:
Jan 13, 2015 | Garden
Aug 24, 2014 | AEG Washing Machines
Aug 20, 2014 | Washing Machines
Jan 04, 2014 | AEG Lavamat 16810 Front Load Washer/Dryer
Jan 14, 2013 | AEG Lavamat 72640 Front Load Washer
Aug 06, 2010 | AEG Washing Machines
Oct 28, 2017 | AEG Lavamat 72640 Front Load Washer
9,685 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: