Software dose"t work,when you press the start botton it flash green, nothing happen after this, its not turning on at all. i can"t understand what happen, why its not working.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
On the 5240 similar model you press the right hand navigation button on the back of the camera. It has a flash symbol engraved on it but not very clear on mine. The screen goes blank as if nothing happens but it is charging the flash and with fresh batteries will come back in 5sec or so. Then when you shoot it will flash, and there will be a flash symbol showing on the screen.....Press again to alter to fixed rather than auto flash, and again to turn off.
I thought the batteries had worn out because when I press the 'on' button the 'busy' light comes on for a few seconds and then goes out and nothing happens. Have changed batteries and checked installed correctly. Any ideas please?
This happened to me too!
Turn the dial to setup, push the menu button & select reset all. This will restore the defaults & let you use the flash again.
The computer should not need any software. Take it out. Plug the camera in The Scanner/Camera Wizard will come up and ask what yopu want to do. Let Windoze do the work
×