Forgotten parent code for Leap pad 2

Gus: If you have forgotten your 4-digit parent lock code you can look it up in the leapfrog.comThis site should fix you up: http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&ved=0CDQQFjAC&url=http%3A%2F%2Fs7.leapfrog.com%2Fis%2Fcontent%2FLeapFrog%2Fparent-guide-leappad-ultra-hw_33200pdf&ei=L1xVVYP1I8OLyAT4noGADw&usg=AFQjCNE_Kfcfx4j3E-4dxJihXAqC3qxHnQ

https://leapfrog.custhelp.com/app/answers/detail/a_id/2349

Hi! In order to help you can you please tell me which is the software you are using?

How do I obtain a parent code for my child's leap pad ultra? My child started the ultra before I could set up anything.

Forgotten the parental control password? there is a way around this. According to the user manual (page 34) for this particular model:

Enter "788444" even if 4 digits "----" appears, then press [ENT]
to clear the current password.
Enter a new password and set the parental lock level again if required.

Note: DVD video discs may or may not respond to the parental lock
settings. Make sure this function works with your DVD video
discs.

You need the original unit's remote to do this. It cannot be done without it.

There is a .pdf of the user manual online.

http://tv.manualsonline.com/manuals/mfg/sanyo/dwm390.html

(It is free to download for personal reference in case you have lost your original copy.)

I hope this helps a tad.

no you cant

1. Turn on your Wii console and go into the Wii Options Menu
2. Click on Wii Settings and click the right arrow until you see “Parental Controls”
3. Say “Yes” to “Change Parental Controls?”
4. Click on “I forgot” when it asks you to enter your pin
5. It will ask you for your secret question, click on “I forgot” again
6. The screen will read “If you have forgotten both your PIN and secret question, call the consumer service number listed in the Wii Operations Manual and provide the confirmation number below. You will be issued a master key.”
7. Call Nintendo at 1-800-255-3700 and give them the confirmation code listed on the screen. They will give you a new Master key to enter on the next screen.
8. The PIN is now reset/disabled

try this. hope this helps :D

when asked for parental code:

press 'select' button --> 7444 --> new code --> re-enter new code

this should start the movie

for the phillips and magnavox tv sets the code is 0711, then open the menu setting restet the code to something easy to remember , or what i would do is completly disable the child lock by going to that option in parental settings.try it hope it works!

Disconnect power to the TV. The power interruption will allow you to reset the parental control password to the default password of 0000.

To change the password after disconnecting the power, do the following:

1. Press the Menu button on the remote.
2. Arrow up / down to SET LOCK CODE
The lock icom will appear
3. Arrow left / right to operate
4. Press 0 to access the lock code
5. The first digit will be highlighted.
Arrow left / right to select the number
Arrow up / down to move to the next digit
4. Continue to follow these directions for all 4 code numbers.
5. Arrow up / down to FINISH
6. Arrow left / right to save settings and exit.

The password has now been reset.