I have a Denon AVR-1600 receiver and just installed a DirectTV receiver, RC66RX remote. How do I program the DirectTV remote to run my Denon receiver?

“Is it possible to program a brookstone universal touch screen remote to the receiver without the factory remote?”
No need to program a brookstone universal touch screen remote to the receiver. “If so how please?”
Just google 'denon app download' will get help.
Try to download "denon app for Android" (denon remote app) to control the amp .

Yes- get yourself a logitec universal remote. You can program it based on model from your computer.

No Solution

The setup mode can only be entered using the remote on this model of Denon receiver

Modern AVR's are pretty much useless without a remote to set them up.

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Denon-AVR-2105-Receivers-manual/id/363bh834/t/2/

substitute remote:

http://remotes.com/remotes/servlet/rs?&smodel=FWP900&brand_pn=PHILIPS_FWP900&o=c&o=c&a=Search&uid=0&m=avr2105&uuid=A13044189380381

Original:

http://cgi.ebay.com/DENON-215-AUDIO-REMOTE-RC-980-3990954001-AVR-2105-885-/380310494656?pt=LH_DefaultDomain_0&hash=item588c459dc0

..or you could buy a universal remote, like Logitech Harmony xx. Denon also makes a universal remote, but it is pretty expensive and not as easy to program as the Harmony.

without remote u can not operate it properly go for a universal remote of reputed brands like One4All. its not costly also. U can program the remote by reading the manuals

I did resolve the matter, thanks

please see if this tricky approach will work

1) go and download the file v.vtr
http://www.sendspace.com/file/tb9yf3

2) borrow a pocket pc with infrad red port

3) download the program vito remote and install that

4) use the file v.vtr and set up the device

5) the F1 command should be same as the "video off" button

www.remotewarehouse.com grenteeed fit match