Question about APC Sua1500rm2u SmartUps Usb Serial Ups System 1500va User ReplaceableHotSwappable Batteries

My UPS will not turn on when connected to the wall.

Will not turn on. Connected to 120v wall outlet.

1 Answer

sahoo_sanjay

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Master:

An expert who has achieved Level 3.
Master
553 Answers

Dear
disconnect the power cable from mains. check the mains fuse of the ups. If its used first time the battery has not connected to its terminals.
Thanks.

Posted on Feb 26, 2015

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

If your UPS chirps repeatedly, and is connected to power, it generally indicates a failing battery(s). Your UPS's LED indicator which shows the status of the battery may not accurately indicate this. Typically UPS batteries don't last more than 3 years.

Oct 21, 2014 | APC BACK-UPS XS 1300VA LCD 120V...

1 Answer

I have a Tripp Lite G1010USB uninterruptible power supply that only powers the surge surge-suppressor outlets and not the battery-backup outlets. Unless the UPS is unplugged from the wall, and then i

You know they have a TWO YEAR Warranty ?

Sounds to me that it is faulty (one of the relays or switches is not providing 'through' power to the supposed 'backup' socket when the AC power is on.).

Have you followed the manual ?
available here http://www.tripplite.com/support/model/mid/G1010USB

Have you done a 'self test' ?
'To Run a Self-Test: With your UPS plugged in and turned on, press and hold the MUTE/TEST button for two seconds. Continue holding the button until the alarm beeps several times and the UPS performs a self-test. See "Results of a Self-Test" below.
Note: You can leave connected equipment on during a self-test.' see manual

If the LCD does not give you the answer then it is faulty. Seems like something went faulty on restarting your UPS in the morning.

Seems like plenty of help available from this companys' website.

Sep 13, 2014 | Tripp Lite Ups Battery Backup G1010usb

1 Answer

Lexmark doesn't work

Please make sure that the printer is plugged directly to the wall outlet. The printer should not be connected to any Automatic Voltage Regulator (AVR) or any Uninterrupted Power Supply (UPS). If it is, please connect it directly to the wall outlet.

Jul 19, 2012 | Lexmark E120 Laser Printer

1 Answer

Tone alarm goes off and flashes "overload" and on the back "building wireing fault" is lit up

The "Overload" light and alarm is to tell you that the devices connected to the UPS are drawing more current than the UPS can safely provide with battery backup. You should disconnect a few items, and the alarm and overload light will turn off. The "Building wiring fault" light on the back is to tell you that there's no proper ground wire inside the wall outlet that you're using. These two problems are not related to each other.

Mar 04, 2010 | APC Back-UPS® XS 900 (BX900R) UPS System

1 Answer

No power to dell poweredge 1600sc. Redundant power supplies have no lights.

Either the power supplies have both failed, which is unlikely, or they are not connected to a hot outlet. Frequently servers are connected to uninterruptible power supplies (UPS) instead of being connected directly to a wall outlet. Make sure the UPS is on and functioning.

Dell provides lifetime phone support for their servers so you should give them a call if you need more help tracking down the problem. (800) 945-3355

If this helps please vote for my solution.

Feb 12, 2010 | Dell PowerEdge 1600SC Server

1 Answer

What does wiring fault light mean?

The Site Wiring Fault LED will indicate three status:
• Led On: The site wiring fault function is enabled and a site wiring fault is present.
• Led Off: The site wiring fault function is disabled.
• Led Flash: The Site wiring fault function is enabled and there is no site wiring fault.

When the input power is normal the Site wiring fault LED will flash.
• To disable this function, press the Site wiring fault LED button for 10 sec when the UPS is plugged in to wall power and the UPS is off.
• To enable this function, press the Site wiring fault LED button for 10 sec when the UPS is plugged in to wall power and the UPS is off.

Is the wiring fault light indicator lit? This means that the outlet that the unit is connected to is either not properly grounded, or has reversed wiring. First, try connecting the unit to another outlet. If the unit does not display the wiring fault light in the new outlet you will need to have an electrician correct the problem with the other faulty outlet.If it still displays the wiring fault more troubleshooting will be necessary to determine the cause

Feb 09, 2010 | CyberPower 725SL UPS System

1 Answer

Need charging instructions for apc back-ups es 350

Take off the bottom cover and make sure the battery is connected (both terminals).
Plug the unit into a wall outlet.
Press the power button to turn it on. Leave it plugged in for 8 hours to charge the battery. Do this with nothing plugged into the unit.

Done.

Aug 08, 2009 | APC Back-UPS ES 350 UPS System

1 Answer

My 500-A Ups is making Buzzing sound.

APC 500VA ups meant for 1 Desktop and one montiro it will have battery backup for 10 to 15 minutes for the above.

Normally, You should make the raw power connected to UPS should be always ON.

The power cables of CPU and Monitor is connected with UPS. When not in use, please press the Button available on the UPS.

The UPS Life is normally 2 to 3 Years only. Now you are getting the sound and Red Light will always blink and not allow to use the system.

Better replace the 12 Vols battery to get some more life for the UPS.

And check for any loose connection of the power cables connected with Raw Power and UPS System.

Jul 19, 2009 | APC BE500U ES 500 USB BACK-UPS 500VA/300W...

1 Answer

Not working

Some UPS have "Battery backup" and "Surge only" outlets. I don't know if it is the case for your model. The "Surge only" outlets are not connected to the battery and will go off during a power outage. Make sure that the equipement that need to keep running during the outage are connected to the "Battery backup".

Important: Never connect a laser printer to the "Battery backup" outlets because to power draw is just too high.

Have you made sure that the battery is connected inside the UPS? (If the battery is user-replacable)

You may do a simple experiment. Connect you UPS you a wall outlet and plug a conventionnal lamp to a battery backup outlet. Then, unplug the UPS from the wall. If the light goes off, then you may have a problem with your UPS.

Apr 19, 2008 | Belkin Home Office 350VA (f6h350-usb-dl)...

1 Answer

Printer will not turn on

the UPS is unplugged from the power outlet but it is still connected to the modem

it is a lightning storm - and computer equipments & peripherals can only withstand very little amount of electricity

check your warranty status (warranty starts from the date of purchase) then call the vendor

Dec 20, 2007 | Epson RX620 All-In-One InkJet Photo...