How do i reset password on RAZR V?

Your going to have to hard reset the phone and lose all your data.
Hold turn on the phone by holding down the power and volume buttons.

You'll have to perform an external factory data reset Perform Factory Data Reset Device Powered Off DROID RAZR RAZR MAXX by...

Mark
Motorola Support

Depends on the model. Factory Reset may be only option.

Mark
Motorola Support

Go to gmail.com and use the reset password option.

Mark
Motorola Support

hi,
go to menu>initial set-up >master reset > then enter your password...

i hope it will help you...

I used to have a razr and I think the default password was 0000. Sometimes the cellphone provider sets its own, (eg. 1234). Here's a link that shows you how if those don't work, http://www.somelifeblog.com/2007/09/razr-v3-master-reset-how-to-guide.html

Depending on how many modifications, hacks, or customizations that you perform on your Motorola RAZR V3 phone, there may be situations where the phone becomes unusable or completely locks up. I have had visitors to the site report not being able to delete ring tones, text messages, or have other strange behaviors with their Motorola RAZR V3 phone.

If this is you situation, then you may be interested in performing a master reset (or “hard reset”) on your phone. The master reset will effectively restore your phone back to the factory condition, inclusive of all settings. Be warned, any data that you have not backed up, photos you have not transferred, calendar settings, or messages you have not saved will be lost! Make sure you do this first, if possible!

Here is how you perform a Master Reset on the Motorola RAZR V3:
1. Open your phone up and go to “Settings”
2. Next go to the selection for “Initial Setup”
3. Next go to the selection for “Master Clear”
4. Then select to confirm the option.
5. Now enter the security code which should be “000000”
6. Finally press select or ok and the phone will reset itself to the factory condition

Congratulation you have performed a “hard reset”, “hard reboot”, or “master reset” on your Motorola V3 RAZR and it should return to normal operating mode!

Trackbacks that led to this post:
hard reset motorolla razr v3
hard reset razr phone
wii master reset
hard reboot motorazr
how to hard reset a razor v3
master reset code for motorola v3
master reset code razr v3
master reset for v3 via pc
master reset motorola razr 2
master reset v3 razr with white screen
motorola v3m master reset
p2k commander
razor master reset
razr 3 and how to reset
razr master reset ebay
razr master reset password
razr master restart
razr screen master reset
reset razr
reset razr to factory
reset razr v3 to factory
v3 hard reset razr
v3 razr reset hard boot

‎

take the phone to a mobile repair center and the code reset back to it's default.

Umm... You have to either to a master reset in the settings. Otherwise try taking out the battery for a while. That or you will have to take it to a mobile center where they can unlock everything for you. Try the support line I remember something like this happened to me with another phone and they helped me.

Press MENU when the password is asked and input 000000. If the security code is changed, the only way to reset the password is using the P2KAE application.