Question about Electrolux Dishwashers
Hi... I just bought Electrolux Dishwasher ESF2433W. When i first time turn it on, light at "Normal" button keep on flashing with beeping sound. After checking the trouble shooting manual, it actually refer to error E4 - overflow. There ia no sign of water overflowing when i lift & tilt the dishwasher slightly to 40 degree. how do i go about it? Resetting ? Appreciate your kind helps. Thank you.
Posted by Anonymous on
Sometimes during trasport it is possible that styrofoam float mechanicaly activated overflow microswitch. So, you should check complitely overflow system.
At any time, if overflow micro-switch act and keep for longer than 2 seconds, the E4 would occur. When E4 occurs, the drain pump will run until flowmeter keep motionless for 2 minutes (if the model with the pressure switch (83/63),drain pump would run till the pressure switch reset and continue draining for 60 seconds.) and all the other components will be stopped immediately. At the same time, the buzzer will alarm for 30 seconds and error 4 will be shown. Note: Priority level of E4 is the highest. E4 operation is valid after other error operations have done. When E4 operation has done, all the others are invalid.
Posted on Sep 19, 2015
I have ESF2400OW, got the same error E4 (leak) manual says to turn to service. I had made the drainage too thin near the sink, so there was a blockage from some small leftover food and water was unable to escape. I sorted out the blockage, plugged it in and turn it on for some time allowing the water in the machine to escape, dried the floor, tilted the machine about 30 degrees backwards, let all excess water drain out, plugged it back in and it worked again.
Posted on Sep 19, 2016
SOURCE: E4 error message
take off two black covers on bottom front of machine and mop up or soak up any water you feel or see at very bottom of machine by a polystyrene float this will fix it
Posted on Apr 05, 2008
Tips for a great answer:
Jan 19, 2016 | Haier Dishwashers
Dec 01, 2015 | Dishwashers
Feb 20, 2015 | Electrolux Dishwashers
Nov 19, 2014 | Electrolux 24" Stainless Steel Built-In...
Oct 11, 2014 | Whirlpool Dishwashers
Hello friend, thank you for your post!
From the information you have provided regarding the heated dry and washing lights blinking on your Electrolux dishwasher it sounds like it could be a possible problem within your control board. I would recommend resetting your appliance which you can by flipping the household circuit breaker in the off position for roughly ten minutes. If you continue to receive the blinking lights I would reach out to a professional to come and diagnose your appliance. I hope this helps. -Matt
Aug 12, 2014 | Electrolux Dishwashers
Nov 04, 2013 | Electrolux 23 in. ESL624 Built-in...
Feb 02, 2013 | Dishwashers
Jan 02, 2010 | Dishwashers
Apr 23, 2009 | Electrolux 24 in. EDW5500DSS Stainless...
915 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: