Re: Where is the Throttle position sensor locate on a...
Passenger side of throttle body just aft of where the air cleaner pipe hooks to throttle body , should be a three wire plug connected to it , held on with 6mm torx screws
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Cadillac1. 2008 Cadillac Escalade/Escalade ESV Owner Manual M ... this model, but your vehicle may not have all of them. For example, more than one entertainment ...
www.consumeraffairs.com > Automotive > Auto Manufacturers
Rating: 2.3 - 18 votes
I love my car but I will NEVER EVER purchase another Cadillac Escalade again. ... I own a 2004 EXT and the trans. had to be replaced within 60K miles (10K miles ... After replacing all the above at 113,385 miles no other problems as of now. .... I bought a pre-owned 2008 Cadillac Escalade ESV under warranty and had ...
This code refers to the intake camshaft position timing. Low/dirty oil can cause the actuator solenoid to plug up. If not low or dirty oil I would check the wiring connections to the solenoid and if ok, replace the intake cam oil control solenoid
This does not sound like trans replace, look for broken or damaged vacuum lines. The trans thinks there is large throttle pressure, so it is delaying shifting....
If you're wondering about the Traction light on the dash... Make sure you have all the same tires with uniform tire wear. Large differences in tread wear could cause this.. Another cause is a wheel speed sensor that's reading
incorrectly and registering one wheel at a different speed than the
other speed sensors. This would require the use of a scan tool that can read ABS
data, to find the problem.
×