At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Charging light is going on continously. what should...
Sounds like battery is not accepting a charge. Take your mouse and "hover" over the battery icon in the lower right corner of your desktop and see if it says "charing". If not, you may need a new battery.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It may be that the light is being tripped due to an "over voltage" condition. The faster you spin the alternator/engine the higher the voltage output of the alternator. I would test the voltage coming out of the alternator. It should be at about 14.3v or so max. If it gets into the 16v+ range when you increase the engine RPM then the voltage regulator has failed and needs to be replaced.
that means it is charging and your battery is low in charge but if it contineous on red light and it is plug to the power supply, then have your battery check in the service center
The control systems on power mobility equipment have a "prevent" circuit that immobilizes the equipment while it is plugged into a charger, so folks won't take off with it plugged into the wall outlet. When you turn it on when plugged into a charger, the display will flash constantly, or sweep constantly, depending on the manufacturer. This is normal. Your off-board charger should have a red light to indicate power to the charger, and another light for the charge status. Yellowish means it is charging, when it turns green, you are fully charged. If the status light is green all the time, that is an indication that the charger is not functioning properly, or that the batteries are below a chargeable state. Check charger output, which should be 26-28 volts dc, and each battery should show at least a 12 volt reading, but around 13.5 volts with a full charge. If one or both of the batteries drops below 12 volts after a short period of time, it's time for a fresh pair. Fully charge new ones before using the chair.
Remove your battery and install the a/c connector - power the unit up then when inside windows refitt the battery - examine the condition in control panel >> power options >> you may have a dead cell in the battery.
The blinking light indicates a charging error. Try connecting a 9 volt battery to your camera battery. Sometimes if the battery has lost all charge, the charger doesn't recognize it properly.
Make sure your power cord is pluged in and the indicator light in front is yellow (saying that it is "charging") - these cords are known to go bad quite often.
Your computer is saying there is not enough battery, or power to keep it from booting all the way up.
×