Question about Columbia All Sport Digital watch
Alright, so the actual solution probably revolves around the fact you are stuck on "T2" time mode. This is found by a symbol that reads either "T1" or "T2" directly above the seconds. So first make sure you are in "T1" by holding the ST/SP button first, then holding the SET button second and simultaneously. After holding both for a couple seconds, the mode will switch from either T1 to T2 or T2 to T1. Once you get the T1 to be selected, you can then press and hold the SET button. Once that is held long enough, a menu will pop up saying "Chime" as the first display. Press the Mode button to start displaying the other features, such as hour, minute, second, month, date, etc. To make changes within a selection use the ST/SP and RESET as up and down changes. When you are all done and back to the Chime feature, you can press SET to exit out of the menu.
As a side note, the T2 function is based off your T1 time, so if you are in a different time zone, you can offset the time by however many hours you off from the T1 time - but the key is to get the T1 time set first.
Hope this helps.
Posted on Dec 22, 2007
Thank you I have had this watch for over a year and finally have it set thanks a bunch
Posted on Jun 06, 2008
I fogot how to set my cheap surge watch i bought from walmart 3 years ago
Posted on Dec 10, 2007
Tips for a great answer:
May 15, 2011 | Watches
Dec 31, 2010 | Watches
Dec 13, 2010 | Watches
Dec 09, 2010 | Watches
Apr 01, 2010 | Watches
Nov 01, 2009 | Timex 1440 Nylon watch
Oct 27, 2009 | Disney Watches
Feb 26, 2009 | Armitron 165 watch
Aug 16, 2008 | Watches
700 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: