Question about Hobart A200 Stand Mixer

2 Answers

Here is a more detailed question of the problem that I have caused myself. I opened up the top of my hobart a200 table top mixer because it was grinding pretty loudly. Ordered the proper grease and packed in in there. The old grease looked pretty good so I left most of it in. Anyway after putting it back together only first gear works. The transmission will shift into second but is real tight going into third. The problem is its not shifting gears,. Regardless of which gear I put it in it continues to run in first. What's the solution?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 3 Answers

Sounds like you over tightened the main shaft nut to much and crushed the brass slip bushings. If they are crushed it will not allow the gears to slip. Only way out is to replace the bushings.

Posted on May 05, 2016

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 876 Answers
Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dc-sm168


Hello, Go here for beaters for your mixer: Hobart Mixer Parts Hobart Mixer A200

Jun 02, 2014 | Hobart A200 Stand Mixer

2 Answers

Hobart mixer


hi Gassman, below you will be able to find a link on parts assembly for the mixer, you will have an idea on how to tear off the parts, get them cleaned and place them back, like a regular maintenance.

Hobart A200 Mixer Parts Assembly

More parts assembly for Hobart A200 Mixer

hope this helps.

fb3484b.jpg

Aug 19, 2008 | Hobart A200 Stand Mixer

1 Answer

Trying to adjust gears on a A200 Hobart Mixer can anyone help?


only adjust ment is top nut tight on center shaft and botton two nuts finger tight then locked against each other. if shifting issue is still a problem you have something inside bad or wrong.

Apr 16, 2010 | Hobart A200 Stand Mixer

1 Answer

On and off switch for hobart stand up mixer a200


I'm a hobart tech---what is the ml number on the data plate?

Feb 23, 2009 | Hobart A200 Stand Mixer

2 Answers

Hobart A200 transmission issues


does not sound good it need to be torn down and checked from here thats more then can be figured out sorry

Nov 26, 2008 | Hobart A200 Stand Mixer

1 Answer

Hobart a200 mixer won't mix


The bowl holds 20 quarts--are you overloading the mix?This mixer is not made for medium/heavy pizza dough.Depending on the pounds of dough,water and other ingredients will affect the mixer in some way.

Nov 09, 2008 | Hobart A200 Stand Mixer

2 Answers

Hobart 450 chopper mixer


Im a hobart service tech and repaired these units often,the seal job is a pain in the ***.Everything has to be torn apart.Forget manuals hobart doesnt give them out but i can step you through it.

Jun 06, 2008 | Hobart A200 Stand Mixer

1 Answer

Hobart mixer


Please be more specific of what part you need.Whats the problem with the mixer?Im a hobart tech and service these mixers often.

Feb 18, 2008 | Hobart A200 Stand Mixer

1 Answer

Grinding


sorry to hear of your misfortune,im a hobart tech and i can tell you right off the bat it would be almost impossible to tell you the solution unless i seen the mixer.be more specific about the noise and where you think its coming from,if its in the transmission i could walk you thru it but it would be a task.first thing to check is that there are no cracks on the mixer.all speeds work?1-2-3.

Jan 04, 2008 | Hobart A200 Stand Mixer

Not finding what you are looking for?
Hobart A200 Stand Mixer Logo

498 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1364 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...