How to put back togeather a electrolux el6989

try utube for a video on putting together or try Electroilux website for the manual.

You need to remove the cover of the nozzle housing. Remove the screws from the bottom to gain access to the elbow. Remove the screws holding the elbow in place, take notice of where all wires go to insure you hook it all back up correctly.

ok,there are a number of screws under the power head unit.Remove them and gently pull off the top.gently remove brush,put new belt on the motor shaft first then put brush nack in position with belt on...Do not tighten up,there should be a little play in the belt.Simply put cover back on ..

Did you follow how motor was taken apart? If not, hopefully color goes with color.

Hi, if you go onto you tube and type in how to replace dyson dc17 animal switch you should find on there or try espares they have different videos and i am sure i seen it on one of the sources given just a week ago.

Christmas 2013 I was given an Electrolux ergorapido. I put it on the charger and red light won't come on or if it by chance does it flashes three times and then cuts off.

please go to the next web page and download your free manual from elextrolux:

http://smallappliances.electroluxusa.com/en-US/Customer-Support/Guides-and-Manuals1/

God bless you

go to any hardware or home store even dollar shops --where ever u choose to go buy a replacement/repair plug .this is not a hard repair cut off plug end strip cover back 1 inch and strip back the wires separate the repair plug usually 2 or 3 little screws- slide wire up into sleeve and connect green wire to u shaped connection- white to silver color[sometimes the connections are not colored ] -black to goldish connection put plug togeather and ur done

you don't, as a repairman, even i have a hard time opening them, and then the hardest part is putting it back together.

www.stickvacrecall.com