Prot light stays on nothing happens. - Visonik V117SX Car Audio Amplifier

Juan?
What's a PROT?

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

Yes, the socket broken loose could be your trouble and is common as we are not careful when we insert the plug all the time.

Its formatter faulty, if its available replace it. or else go for new printer.

if your light is on have codes pulled to tell you what the problem is then go from there

just wait till the battery power gets full.

The RAM may have been "jammed up" when it was put to sleep. You said you powered down completely and then started up again. How long did you leave it before turning it back on? Try it again, but this time, unplug the adapter from it and also take out the battery so there is absolutly no power going to it. Leave it like that for about 5/10 minutes and then try it again.

Hopefully that will help you out

Ok this means the AMP is in protection mode!..most likely the cause is a short in your wireing from the speaker wires! check all wires going in and out of amp! Look for stray wires touching metal or other contacts! (If this does not fix it the short may be inside of amp!
(This has nothing to do with a fuse!)
Please rate this FREE response!
THANK YOU!

Ditto... except my daughter is 10. Both screens remain black, are fully charged and green light stays on for more than 4 minutes.

Hello. First, disconnect all of the speakers the amp is driving and the rca inputs while the amp is off. Now power on the remote. If the prot. light still stays on you will need to varify that the voltage across the ground and b+ terminals is a minimum of 12 volts. If this is true than your amp may be damaged due to shorted parts. Otherwise, try to repower the amp while a speaker is connected and if it is O.K. than there may be a problem with the RCA ground in the head unit or the amplifier. We service these amps at Sound Repair 321-690-0808.

Is the voltage staying at 135 volts or is it rising?? There are several power supply fix it kits available as well as a way to test the power supplys. please let me know as I have a nice library of sony kits to use as well as a way to test the power supplys. Also a bad Crt can cause a shutting on and off of a projection set as well. If this is the case, try having the CRT rejuvenated and see what happens. please do not forget tp rate this htread.