Question about 3Com Computers & Internet
The following firmware have already been tried (and were rejected by the web interface): BL_2226_SWITCH_PLUS_v.184.108.40.206_bfs01.1.0.15 BASELINE_SWITCH_2426_PWR_PLUS_v.220.127.116.11_bfs01.1.0.15
Posted by Anonymous on
SOURCE: i forgot my admin password
If it's the Power Plus (3C16475BS) model, there should be a reset button inside a small hole on the back. "10 - Recovery Button" Inserting a paperclip or similar to reset. If it's not the Power Plus model and is in fact (3C16475A), this is an unmanaged switch, with no administrative capabilities. You don't need a password.
Posted on Feb 25, 2011
SOURCE: in one of my small
That means both switches not communication to each other. They however communicate among themselve. Check uplink port, check cable, may need to use cross over cable for connecting both switches.
When node connecting to switch (3com or cisco), it gets dynamic IP or static, check to see if it obtains IP at all and we go from there.
Posted on Aug 01, 2011
SOURCE: I have an SF300-24.
Again try with console cable then reset the settings of switch to factory defaults. Run "clear config all" command . Then then you can set ip address for interface vlan 1 ip address. Let me know if you need further assistance. Thanks for using FixYa.
Posted on Sep 16, 2011
Tips for a great answer:
May 07, 2014 | Barracuda Networks Barracuda Web Filter...
Jan 16, 2013 | Panasonic KXTPA50 Phone
Feb 11, 2011 | NetGear WGR614L Wireless Router
Dec 03, 2010 | D-Link AirPlus DI-524 Wireless Router
Jul 02, 2010 | NetGear WGR614 Wireless Router
Jan 26, 2010 | Linksys WRT120N Router
Dec 17, 2009 | Nokia 5630 XpressMusic Smartphone
Oct 21, 2009 | NetGear WNDR3300 - RangeMax Dual Band...
Apr 11, 2009 | Lands Phones
Mar 12, 2008 | Belkin (F5D7230-4) Router (587009)
674 people viewed this question
Usually answered in minutes!