How do I get my hands on a technical repair manual for a Dahle 20606EC shredder with all the specs, part #'s, troubleshooting, etc..

How is the lubricating oil tank for fill level?
Automatic Oiler

Quote
Just like any fine-tuned machine, your shredder needs to be properly oiled to run at peak performance. This shredder is equipped with an EvenFlow Lubricator which provides slow, continuous oil across the entire cutting mechanism.

Also check for anything jamming the blades and forcing them apart. There may be an adjustment for tension. I have never seen a shredder with cutting rollers like this before!

https://www.dahle.com/shredder/item/40434

It is a $5,000 machine, so you might reach out to Dahle if oiling isn't the problem.

..

Most shredders have strict rules about running times. Usually the motor cuts off after 5 minutes use (or thereabouts) and you have to wait for a sensor to cool down, maybe 15 minutes

if you are using the auto oiler that alarm doubles as the low oil alarm. The low oil mark on the tank is not accurate. This frustrated me for weeks until I finally called Dahle and that's what they told me. JUST ADD OIL... I know its that easy!

The most common reason for a false reading, where the bin full light comes on but the shredder basket is empty, is simply dirty sensors on the bottom side of the shredder head.

you can get guides online for error codes/ fault codes, wiring diagrams, schematic diagrams, torque specs, engine info, switches functioning, assemble, disassembly, complete refurbish, repair, installation every single thing is covered
within seconds u can get the access and it's totally illustrative complete
I know these websites

make sure sensors are plugged in and cleaned

check the micro switch that control the bag full flap and if you need a switch email [email protected] we have parts

Sorry, you cannot buy spare parts for Dahle trimmers.

Go to http;//audio.manualsonline.com maybe there you find an answer.