- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It means that you haven't program there channels on your TV. Just about everybody use cable services, which in terms means that those people donut search for TV's channels, they usually have the TV set at HDMI1 or HDMI2. Press menu, under menu strength for channels, from death for new channels. Best time you use the control remote you'll be able to change the channel to other than 2. Good luck.
I talked to the manufacturer & they said that all I needed to do was to run the channel search, uninterupted, again. I did it & everything works. Thank you for your input.
I am not an expert but I would guess the tv is broken.
The set might need retuning to receive programmes from an aerial but that would necessitate using the remote to select the main menu. If the menu cannot be selected it is a big clue...
When a signal is injected through an HDMI port or similar the tv should respond automatically. If it doesn't respond I believe that is another clue the tv is broken.
You could make sure by downloading an instruction manual just to be certain you are doing everything right.
you will have to select the video channel source for the TV, usually like av1 or av2 or something like Video 1 Video 2, channel 3 only works with RF switches it wont work with RCA jacks. there should be a video source button on the remote, if you lost your remote then try pressing channel down it usually comes before channel 2, if it dont show up then you will have to press the video or source button in the remote.
×