My F&P washing mach is going thru the cycles fine but it has an annoying squeak when filling up? It's only a few years old, a smart touch. It also squeaks on the wash cycle

samsung e1175t dead problam sulation

Enter from the back. Might be your motor bearing.

How is the water pressure? When it fills, is it different then before?

this could be a pressure sw . too ck remove the air tube and blow on the sw it should click . or use a ohm meter to ck it it has 3 wires going to is power in ond power out to valve when it gets full of water it shuts of water and turns on motor .. . the spin does not have anything to with fill & wash . but it does help for the diag of mach ( thanks ) hope this has helped mm feed back pls ..

sounds like a touch membrane issue

sorry its the clutch and trasmission its going out either repair or replace the washer my wifes washer started doing the same thing somedays it did fine and others times started squeaking.

I have a smart drive 708 that will turn on but won't fill, any suggestions?

It sounds like the timer/controler is broken replace it. Peter

I have an IFB washing maching it does not spin dry the clothes any solution