How format card

hmm thats a lil odd in windows or mac you may need to reformat the drive (warning any data will be deleted forever when doing this) right click on the drive and click format and you will see the format box appear where it says quick format make sure the check box is clear (this will perform a low level format on the drive again any data on the drive will be forever lost) click ok or start and the drive will begin to format and reset the size of the drive if not let me know ok?

Try a different memory card.

1. Power the camera off and remove and replace the card several times.
2. Recheck.
3. Put in another memory card and check.

If the recheck (2) does help, it may be dirty contacts.
If another memory card has the same issue, the camera needs repair.

To format a memory card, press the MENU button, use cursor-up/down to select Settings, press the OK button, use cursor-up/down to select "Format," and press OK.

The DX7590 works with MMC and SD cards. It does not work with SDHC cards. If you mean an 8GB card, then that's an SDHC card and will not work with the DX7590. The camera is limited to cards 2GB and smaller.

This usually happens when the wrong type of card is inserted. For example, your camera takes SD cards. If you try to use an SDHC card, the camera cannot work with it and just stalls.

Hi, look here's what to do, get yourself, or access to, A Computer, and a USB SD card reader, now, insert your 8GB SD card into the reader/writer, It will show up as a HDD in My Computer, and then, Format it FAT32. Now return it to the Camcorder, when turned on again, the Camera NOW should "See" the SD card. You may even be asked if you wish to Format,again,say YES, and do so, if NOT asked that;s OK too. as, you should now be able to, in either case, be able to have access to the SD card, and can change your phone settings accordingly, the extra storage will simply be "Picked Up" by the Camcorders software.
If this doesn't happen, then there maybe a problem with THAT SD card or the Camcorder? try another SD card before thinking the camcorder has a problem though.

hi,

1. Power on the Nokia 6133. Turn the Nokia 6133 on and allow it to load the home screen.
2. Navigate to options. Press the "Menu" key on the Nokia 6133. Select "Options" and press "OK".
3. Select the memory card folder. Highlight the memory card folder. Press "OK".
4. Select options. Select "Options". Highlight "Format memory card".
5. Confirm the format. When prompted, select "Yes". Wait patiently while the Nokia 6133 formats the memory card.
6. Enter a name. When the Nokia 6133 is finished formatting the memory card it will ask you for a name. Enter a name into the Nokia 6133 for the memory card. The Nokia 6133 allows the name to be up to eleven characters and numbers.

go to the menu and push (format memory card) then a a warning will come up that says (Warning Formating card will erase all that is on the care) push OK and it should format in might take some time !!Good Luck!!:)

The Polaroid PDC 700 digital camera accommodates an optional, Type 1 ATA compatible CompactFlash memory card up to 48MB. When an unformatted memory card is installed in the camera, it is automatically formatted when the camera is powered on. WARNING: Once you format the flash memory or format a memory card, all images are erased and cannot be retrieved - they are gone forever! Before you format (erase) the flash memory or format a memory card, transfer the images to your computer.

If you used the SD/MMC memory card in another brand of camera or device, you may need to format the card in your new EasyShare digital camera. (You may have noticed a "Memory Card Needs Formatting" message when you inserted the card.) CAUTION: Formatting deletes all pictures and videos, including those that are protected. Removing a card during formatting may damage the card. To format the SD/MMC memory card or the internal memory of the camera: Transfer images to the computer before formatting the memory card. Press the camera Menu button. Highlight SETUP MENU, and then press the OK button. Highlight FORMAT, and then press the OK button. Highlight an option - MEMORY CARD (deletes everything on the card), CANCEL (exits without formatting), or INTERNAL MEMORY (deletes everything in internal memory). Press the OK button. Highlight Continue, and then press the OK button. Wait until formatting is finished before removing the card. When formatting is complete, the SETUP MENU is displayed. Press the Menu button to exit the menu.