Question about Coffee Makers & Espresso Machines
good morning to you . Yours is a machine that boils all the waterbed fore it goes through the coffe. I have had one like that and if my memory does not fail me, it stopped boiling the water and there was I tiny wee valve that had to be replaces. The valve was in the bottom part. Good luck, kolbrun
Posted on Feb 06, 2015
It may not help but won't hurt; put a couple of cups of plain vinegar into the water chamber, turn on briefly until it starts to pump, then turn off and leave overnight - at least, if not longer. The mild acid content may clear some lime buildup.
Posted on Apr 14, 2010
SOURCE: Warming plate boils coffee.
Make sure you are using the type of commercial coffee pot like the one in the picture. They don't have to have to be plastic with the metal bottom, they can be all glass. The commercial pots are heavy duty and usually disperse the heat well.
If you are using commercial pots the only solution without replacing the warmers is to put three pennies on the warmer and to put the pot on top of them. The pennies will get hot so don't forget and grab them but the pennies help to move the pot just a little way away from the direct heat.
Posted on Feb 09, 2008
SOURCE: Bunn VPR 04276-0003
There is a thermostat underneath the top of the machine. There are a couple of little screws that you need to undo then you will see a little dial or even a little T on top of a metal box or circuit board. I recommend that you unplug the machine before opening it up. Then just turn the thermostat down - usually counter clockwise. Turn it just a little and put the top back on the machine and let it heat up.
Posted on Jul 18, 2008
SOURCE: Bunn coffee maker leaks water
There are 3 seals in your unit that could cause your problem. there is a silicon seal right under the pour-in tray, and two on the top of the tank. one of those is for the thermostat, the other is for the sprayhead tube. any of these could leak, causing water to come out the bottom of the brewer. One other thing that can cause this is a scale buildup between the pour-in tray and the tank.
Posted on Feb 13, 2009
As you explain i understood that heating element is in defect. Even if you don't find replacement in part DO NOT THROW IT. only remove electrical parts and you use it in direct heat , with gas or fire. buon apetit.
Posted on Aug 30, 2010
Tips for a great answer:
Feb 22, 2014 | Krups Nescafe Dolce Gusto
Dec 31, 2012 | Coffee Makers & Espresso Machines
Apr 02, 2012 | Coffee Makers & Espresso Machines
Feb 13, 2011 | Keurig Elite B40 Coffee Maker
May 05, 2010 | Bunn-O-Matic Coffee Brewer GRW8
Mar 14, 2010 | Bunn VPS Coffee Maker
Jun 11, 2009 | West Bend 56860 10-Cup Coffee Maker
Sep 26, 2008 | Bialetti Moka Easy 6-Cup Espresso Machine
Jun 29, 2008 | Krups FME2 Coffee Maker
61 people viewed this question
Usually answered in minutes!