Hotpoint SY36 Style Line Stainless Steel Electric Single Oven Logo

Question about Hotpoint SY36 Style Line Stainless Steel Electric Single Oven

1 Answer

Function button keeps failing

Whenever the power to the oven is switched off (ie due to a powercut) the display shows the word STOP and the oven/grill etc will not work unless the clock is re-set. However the function button that you press to change to set the clock does not work. We have had hotpoint out to replace it 3 times and each time it stops working after a few weeks. This is fine until there is a powercut and then we cannot re-start the oven. Is there a way to bypass the clock re-set and get the oven working again without paying hotpoint another £80???

Posted by feebs on

1 Answer

Jason Harris

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 274 Answers

Only do this if you relay know what you are doing. try asking your local appliance second hand shop it will save you time and money

Posted on Jan 05, 2008

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Whirlpool generation 2000 wont reset after powercut. Just says STOP.

Turn left knob to dash mark then turn right knob on normally see if this works. Hope this helps.
0helpful
1answer

Cant get oven to Work after powercut, display says "stop". Can any one help?

You need to reset it by the looks of it. Try pushing and holding in any programme buttons / knobs for 5 sec or so to re set the thing. Even turning off the main power switch at the wall for sev min if it has one. another posibility is that the powercut has produced a surge or spike that has damaged the onboard "computer" -hopefully not.
Oct 03, 2013 • Ovens
0helpful
1answer

Clock constantly flashes `A` and cannot get top or bottom oven to come on. Have tried resetting the clock but the buttons do not appear to be functioning. The mains power `has` been off due to having a...

It looks like the clock has failed. Try leaving the power off for at least 10 mins, turn it back on at the main switch and then try it. If it still doesn't work Espares can get you a new one. Incidentally, if there is power to the oven, the grill will work even if the clock is not set.
6helpful
1answer

Hotpoint BU62 double oven, no grill functioning

keep turning the oven/grill selector past the temperature settings, it feels like it won't go any further but it does!
1helpful
2answers

I am getting an F7 error message more and more frequently. When the F7 message is on the display, my kepad does not work and I get an annoying beep. When I press "Clear" the F7 and beep will stop until the...

Hi

You don't say what type of GE oven this is so I will advise the following;

On a GE range oven F7 indicates either a function pad button is stuck or the clock on the oven is malfunctioning

On the 99 Range oven F7 indicates a shorted Clear/Off Key due to membrane switch or a shorted control or connector

On the GE XL44 Self Clean Oven F7 is Stuck keypad or control relay malfunction

Hope this helps. Please remember to rate my answer. Thank you.
Jul 07, 2009 • GE Ovens
1helpful
1answer

I have a stoves 720EF Heritage - electric - the top grill is not working - does it have a reset button?

No, there is no reset button. However, the grill will only work when the front is down as there is a microswitch which operates to provide connectivity when it is in this position. This is to stop the grill overheating. The switch could have gone faulty.
Does the top oven work ok?
When you operate the grill there are two options, part or full. Are they both failing? Does the cooling fan switch on when either grill is operated?
0helpful
1answer

Thermador SC302T clicking noise, locked door after power outage

iodine, open the upper oven, look thru the grill below the control panel on the right side and there is your model number. The issue here is that when the power came back on the oven run thru a test and your lower lock motor has failed. It will need to be replaced. Yes the only way to stop this is to shut off the breaker.
0helpful
1answer

Door Keeps Locking and Unlocking after Power Outage

Located the switch - resetting fixed my stove as well.
11helpful
1answer

Whirlpool electric oven

hi switch main power off at wall. hold middle clock button in and switch power back on at the wall. Display should show --:-- and oven should work.
Nov 30, 2007 • Ovens
Not finding what you are looking for?

564 views

Ask a Question

Usually answered in minutes!

Top Hotpoint Ovens Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22516 Answers

Brad Brown

Level 3 Expert

19166 Answers

Marvin
Marvin

Level 3 Expert

85242 Answers

Are you a Hotpoint Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...