Kenmore dishwasher blinking E2F2 - Kenmore Dishwashers

The E2F2 error code on a Kenmore Elite washing machine typically indicates a problem with the communication between the control board and the motor control board. This could be caused by a faulty control board, a loose or damaged wire connection, or a problem with the motor control board.
Here are some steps you can take to troubleshoot the issue:

1. Unplug the washing machine for a few minutes and then plug it back in to reset the control board.
2. Check the wire connections between the control board and the motor control board. Make sure they are secure and free from damage.
3. If the wire connections are okay, you may need to replace one or both of the control boards. You can find replacement parts online or through a local appliance repair shop.
4. If you are not comfortable working with electrical components, it's best to contact a professional appliance repair technician to diagnose and fix the problem.

I hope this helps!

Kenmore Elite dishwasher Smart Wash light blinking
Sanitize Blinking Light
Some Kenmore dishwashers have a sanitize feature; when this light blinks, it means the sanitization step failed because the hot water in the dishwasher did not achieve the desired temperature or the final rinse cycle was interrupted.

How to Reset Codes on a Kenmore Dishwasher - Hunker

https://www.hunker.com > ... > Dishwashers
Search for: Kenmore Elite dishwasher Smart Wash light blinking
More here

https://www.applianceblog.com/mainforums/threads/kenmore-elist-665-dishwasher-smart-wash-red-light-blinking-machine-not-working.29342/


https://www.google.com/search?q=kenmore+elite+dishwasher%3F+The+smart+wash+light+blinking

Here are four suggestions for you to try:
Kenmore dishwasher blinking light

Appliance Repair Forums

http://forum.partsdr.com/showthread.php?693-Kenmore-dishwasher-with-constantly-blinking-quick-rinse-light

https://www.askmehelpdesk.com/appliances/kenmore-dishwasher-model-665158240000-quick-rinse-flashing-64022.html

Hi Roger, Hope this helps......CHEERS..

KENMORE DISHWASHER ERROR CODES

Kenmore Dishwasher Error Code = Start Resume light blinking slow
When the dishwasher door opens or electrical power is removed during the cycle then the dishwasher will not start again. The door is detected as being closed and the Start Resume button is being pressed
Kenmore Dishwasher Error Code = Clean light is blinking 7 times
Heater circuit fail. Control panel did not detect the water getting hot. Did not detect heating element was energized to heat the water during the wash cycle
Kenmore Dishwasher Error Code = Sanitize LED blinking at end of cycle
Control panel could not detect if sanitation has been achieved
Kenmore Dishwasher Error Code = Console light blinking rapidly
There is a stuck button on the control panel
Kenmore Dishwasher Error Code = Clean light is constantly illuminated
Dishwasher cannot start a wash cycle until it sees that the door has been opened after the previous washing cycle
Kenmore Dishwasher Error Code = Control lock LED is ON but not responding to pressing of the keys
Turned on by accident or there is a control detected key pad problem

duplicate question > This appears to be another ... posting same answers

Appliances branded with the Kenmore logo and sold through Sears are produced by other major manufacturers.
So First: Using the Sears Model Prefix Chart, find out which manufacturer produced your appliance to find the right repair information. Locate the model number on your appliance and match up the first three digits before the decimal point of the model number to find the manufacturer.




Then search the appropriate manufacturer Fault codes to diagnose (and hopefully fix) the problem
.http://www.partselect.com/JustForFun/Fault-Codes.aspxwww.partselect.com/JustForFun/Sears-And-Kenmore-Appliance-Fault-Codes.aspx
Sears and Kenmore Appliance Fault Codes

If you need further help, I’m available over the phone at https://www.6ya.com/expert/steven_7f54ab9063554f66

Appliances branded with the Kenmore logo and sold through Sears are produced by other major manufacturers.
So First: Using the Sears Model Prefix Chart, find out which manufacturer produced your appliance to find the right repair information. Locate the model number on your appliance and match up the first three digits before the decimal point of the model number to find the manufacturer.




Then search the appropriate manufacturer Fault codes to diagnose (and hopefully fix) the problem
.http://www.partselect.com/JustForFun/Fault-Codes.aspxwww.partselect.com/JustForFun/Sears-And-Kenmore-Appliance-Fault-Codes.aspx
Sears and Kenmore Appliance Fault Codes

If you need further help, I’m available over the phone at https://www.6ya.com/expert/steven_7f54ab9063554f66

This appears to be a duplicate question: Answer I provided on the other is below.
Appliances branded with the Kenmore logo and sold through Sears are produced by other major manufacturers.
So First: Using the Sears Model Prefix Chart, find out which manufacturer produced your appliance to find the right repair information. Locate the model number on your appliance and match up the first three digits before the decimal point of the model number to find the manufacturer.




Then search the appropriate manufacturer Fault codes to diagnose (and hopefully fix) the problem

Sears and Kenmore Appliance Fault Codes
[img alt="partselect.com" src="http://i.fixya.net/uploads/images/embeddedlinks/1593511-partselect.png?2.0" >
Sears and Kenmore Appliance Fault Codespartselect.com
Appliances branded with the Kenmore...


If you need further help, I’m available over the phone at https://www.6ya.com/expert/steven_7f54ab9063554f66

The blinking buttons indicate the buttons are bad. The console will have to be replaced.

key pad need to be change

could be faulty outlet pump