Playing old messages then deleting them one by one

mail box is provided by mobile network provider. Listen to instructions on which number to press to delete messages you need to listen to saved messages ( this will be one of the number options) and after the message plays you will hear a choice of what each number on key pad does one of them will be delete message or ask mobile phone network provider as it is different for each provider.

I don't think you can. you only get the option to delete the message while the message is playing.

Listen to, Save & Delete Messages
The system automatically saves your messages until you delete them, and can store approximately 15
minutes of messages, memos, and announcements (up to a maximum of 99 messages). A message
or memo can be up to four minutes long.
The message window will ?ash to alert you to new, unplayed messages. If all messages have been
reviewed, the number displayed in the window will glow steadily. If the system contains both old and
new messages, it will play only the new messages ?rst. After all new messages are played, press the
PLAY/STOP to hear all messages

Read the manual here.

http://www.vtechcanada.com/support_docs/vtt/CS/CS6449-x_en_cib.pdf

Are you trying to get the messages from the phone directly or by calling into your phone.

If the answering system is on, then you can play back the messages from the base by pressing the Play/Stop button.To delete a message from the base, press the Delete button (has a 0 with a slash through it) while the message is playing. To delete all messages, press the Delete button when the phone is in standby. From the handset press the Messages softkey (has an envelope icon) when the phone is in standby. Then press Play/2 to play back the messages. To delete a message, press Delete/4 while it is playing. (Deleting all messages can only be done at the base.)

If you are calling into your phone system, you need to have set a two-digit PIN from either the base or the handset and remember it. Then call the number for your phone from a touch tone phone, press 0 and then the PIN within 2 seconds. (Do this while your greeting is playing or after a series of beeps when the phone answers your call after 10 rings if the answering system was off.) If the system is off, start by pressing 0 6 to turn it on. Press 0 2 to play back the messages. (All commands need to be entered within 15 seconds of the last command finishing with both keys pressed within 2 seconds.) To delete a message, press 0 4.

Uniden has the manuals for most of their phones on their support site: http://www.uniden.com/scat/cordlessphones_mnl . Phones are listed in numerical and alphabetical order; thus the TRU9480 manual is on page 7. The direct link to the TRU9480 is http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/TRU9480om.pdf .

I hope this helps.

Cindy Wells

Since you declined to specify the model of your Uniden DECT 6.0 system I can only suggest you select it from the list beginning here to download a copy of the manual.

SOME WORKAROUNDs - which MAY NOT WORK for everyone!


while ensuring that the TBB line is ON HOOK - NOT OFF HOOK:

1) LISTEN to your NEW VM through the Portal. If you listen through Email forwarding - this will NOT cancel the flashing VMWI.

2) Access your TBB VoiceMail from another phone (cell) or through RemotePhone. LISTEN to your NEW VM from there.

The flashing VMWI should be OFF and back to normal operation! You need to repeat the above steps for any NEW VM.

•You need to have at least one NEW VM that you have not listened to for the above to work. So if there are no NEW VM, phone your TBB line and create one. Then LISTEN to it from the Remote Phone/ cell phone, or delete it from the Portal, and the light should go off.

•Note that listening to or deleting OLD VM (whether in CURRENT or SAVED folders) will do nothing!

The manuals for the AT&T 1738 can be viewed and downloaded here:

http://telephones.att.com/telephones_ui/support/dsp_manual.cfm?manualID=21714

Here is what the manual says about deleting messages remotely:

DELETE MESSAGE Press and release 3 while the message is playing.
DELETE ALL MESSAGES After you have listened to all messages and heard the
two beeps, press 33.

The manuals for the AT&T 1738 can be viewed and downloaded here:

http://telephones.att.com/telephones_ui/support/dsp_manual.cfm?manualID=21714

Here is what the manual says about deleting messages remotely:

DELETE MESSAGE Press and release 3 while the message is playing.
DELETE ALL MESSAGES After you have listened to all messages and heard the
two beeps, press 33.

Taken from the 1725's User Manual:

Deleting Messages
1 Connect with the answering
system.
2 To delete selected message — Press
and release 3 while the message is
playing.
To delete all messages in a
mailbox — After you have listened to
all messages and heard the two beeps,
press 3, and then the mailbox
number.

You can download a copy of the manual at the following URL:

http://telephones.att.com/telephones_ui/support/dsp_manual.cfm?manualID=164

to play your messages

press the button with the speaker symbol on the handset it shows ans record on the screen, then press number 2 and your messages will play.

press * to delete the currently playing message DELETED will be displayed

to delete all your messages

press the speaker button ans record shows in the window, press the star button the display shows DELETE press ok to confirm the display shows deleted and you will hear a confirmation tone.
press c if you decide to cancel deletion

press and hold c to exit and return to standby

hope this helps you all,