How 2 reset my printer s405

Although you can send faxes from your computer, I regret to inform you that the S405 printer software does not have the option to pick up faxes. For the receiving option, you can only configure the fax receive settings using the printer software.
I'm sorry if did not have the answer you expected.

Please visit the Lexmark website to download and install the Lexmark Interpret S405 Printer Driver on your computer. Select your operating system > click on "FILTER" > click on the driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen to complete the installation.

When a Lexmark cartridge is refilled, it will not be able to report its ink level.
Please note that all Lexmark printers work best when original supplies or genuine Lexmark cartridges are used. We do not recommend the use of third party, refilled or remanufactured cartridges - you might not get the print quality you expect from ink that is specially formulated by Lexmark.

Try to reset your printer's wireless network adapter. From the printer operator panel, press the Setup button > Network Setup > Reset Network Adapter to Defaults. The WiFi light on your printer will momentarily turn off then on to a solid orange light. You may then run the printer wireless setup utility on your computer to configure the printer for wireless connection.

It could be a slight communication problem between the black cartridge and the printhead. Try to remove the black cartridge from the printhead. Close the printer cover. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reinsert the black cartridge. Check for any errors.
Make sure your printer is updated. You can download the firmware update for the Lexmark S405 printer by visiting the Lexmark website at http://bit.ly/s405fw.

Try to reset the printer. Unplug the power adapter from the printer.

Wait at least 10 seconds before replugging the power adapter into the printer. When the printer completely boots up, try to make a copy a again. If problem continues where it is partially printing copies or having print quality issues, you may need to update the printer's firmware. Firmware update for the S405 is available at http://bit.ly/s405fw.

The link below take you to the Lexmark Interpret S405 page to download drivers and software. You may have to change your operating system (OS), the default is Windows XP 32-bit. You want to click the "More>>" button to find the link called "Complete drivers and software for setting up,....". You probably dont need to update the firmware unless there is a problem after installing.

Lexmark Interpret S405 Software and Drivers


I hope this helps you. Have a great day!

Sound like printhead problem... ask from lexmark for replace (call them +1 800-539-6275). If they refuse to give you, than search on amazon for it... here Amazon com LEXMARK 405 printhead. I hope this was helpful. Cheers

Click here Click on above link download driver for your printer for your operating system. Then copy it to usb flash drive then you can install driver with that usb flash drive so you don't need cd rom. Let me know if you need further assistance. Thanks for using FixYa.

Press the Fn and F9 keys, that should turn it back on. Let us know if that solve your issue and please dont' forget to rate this posting.