How can i reset factory setting on my sony dsc55 camera

You may try to reset to factory settings. you may try to restore Locate the RESET button on the camera.Use a pointed object (like a ballpoint pen) to press and hold the RESET button for 2-3 seconds and then release.

It does not have a "reset" button, but you can restore it to factory settings. Here is how:

-Turn the camera on

-Press the "home" button and select the "settings" tab.

-Go to Main settings 1 and choose "initialize" then choose OK.


Thanks for using Fixya!

Hi,

If the Menu settings in the camera is changed, then I suggest you to reset the Camera back to factory default. Initializing the Camera back to factory default will set all the settings in the Camera back to factory default.
To initialize the Camera back to factory default, select the INITIALIZE Option from the Main Settings 1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.
You can also try a manual reset;

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

The blurry image capturing can also adjusted by changing the ISO Settings or the Scene Selection modes.

Thanks for using FixYa!

Hi,

The C:32:01 error code displayed on the Camera screen indicates the internal malfunction happened in the Camera. Try turning off and on the Camera to check if it works. If the issuer persists, perform the following steps:

Performing a manual power reset may help:

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the Main Settings Menu of the Camera to OK. This will set the user defined settings back to factory default. The images and videos will not get deleted.

Reset the camera to factory specifications to try resolving the issue.

Thanks for resolving the issue.

Hi Nick,

The DSCW210 Camera is compatible with the Memory Stick ProDuo up to 32GB. The Camera will not recognize the Memory Stick if it is formatted in the Computer. Try removing and reinserting the MS and check if it helps. Try using different MS to check if the issue is with the MS or with the Camera. Try resetting the Camera and check if it helps.

Performing a manual power reset may help:

· Turn off the camera.

· Remove the battery pack.

· Press and hold the power button for 30 seconds.

· Allow the camera to remain without power for 60 seconds.

· Reinsert the battery pack.

· Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the Main Settings 1 Menu of the Camera to OK. This will set the user defined settings back to factory default. The images and videos will not get deleted.

Reset the camera to factory specifications to try resolving the issue.

Thanks.

KenSolutions

FixYa

Cyber-shot cameras nowadays have a built-in rechargeable battery for retaining time, date, and other settings. Since the built-in rechargeable battery is not removable, current Cyber-shot camera models can only be returned to the original factory settings by pressing a small RESET button on the camera or by using an Initialize option in the menu.
Older-model Cyber-shot cameras (prior to the year 2000) do not have a built-in rechargeable battery and do not have a RESET button or Initialize option in the menu. These cameras require a manual power reset.
IMPORTANT: To determine whether or not your camera has a RESET button or Initialize option, or for other model-specific information to complete any of the steps in this solution, refer to the operating instructions supplied with the product. Manuals are available online in the Manuals/Specs/Warranty section of the Sony® eSupport Web site.
Follow the appropriate procedure below for your camera.
Using an Initialize option in the menu
Since Cyber-shot cameras have different menu system layouts, refer to the instruction manual specific for your camera model.
Using a RESET button

1. Locate the RESET button on the camera.
2. Use a pointed object (like a ballpoint pen) to press and hold the RESET button for 2-3 seconds.
3. After 2-3 seconds has elapsed, release the RESET button.

Performing a manual power reset

1. Turn off the camera.
2. Remove the battery pack.
3. Remove the button-sized lithium battery.
4. Allow the camera to remain without power for 30 seconds.
5. Reinsert the button-sized lithium battery.
6. Reinsert the battery pack.
7. Turn on the camera.

Hi,
Press the reset button on your camera this will be close to the pin where you can connect the power supply to your camera. The button will be a small hole use a pointed object (like a ballpoint pen) to press and hold the reset button for 2-3 seconds. After 3 seconds release the reset button .
Now your camera is reset to factory settings .

Hope this helps .

Hello!

Please turn off the Camera and pull out the Battery then press and hold the Power button for 30 seconds. Next, reinsert the Battery and turn ON the Camera then reset it to the original factory settings. Furthermore, please ensure that the Battery pack in the Camera is fully charged.

Follow the steps given below to reset the Camera to the original factory settings:

Press the Home button then select Settings, Main Settings 1 using the control button. Next, select Initialize and OK.
This will reset the Camera to the original factory settings. If the issue persists then the issue is related to the image sensor of the Camera and service will be required to get it fixed.

Hi!

The error E:91 indicates a hardware malfunction in the Camera. In this case, you may try resetting the Camera to the original factory settings.
Follow the steps given below to reset the Camera to the original factory settings:
(a) Press the Menu button to display the menu screen.
(b) After pressing the right arrow on the control button, go to the (setup) setting, then press the right arrow again.
(c) Next, press the left/right/up/down arrow on the control button to select "Setup 1" option.
(d) Then, select the "Initialize" option OK, OK.
(e) Set the clock if date and time screen appear.
(f) Next, turn off the Camera and remove the Battery pack and press and hold the power button for 30 seconds.
(g) Then, reinsert the Battery pack and turn the Camera ON.

Performing all the above steps will reset the Camera to the original factory settings. After resetting the Camera to the original factory settings, please check the operation of the Camera.
If the Camera continues to display the error E:91 then service will be required.

Regards,
Pacific.

Go to camera Menu and select Initialize, this will Reset your camera to factory default settings.