Question about Rotel Audio Players & Recorders
No sound coming from my Rotel -RSP-976 analog inputs. I did all the settings on OSD and even reset to factory settings
Hi Awal. Interesting problem. Have you tried another pair of leads? What source are you using please, cd tuner etc? I noticed the the names for the five audio/video inputs can be customized by the user, Maybe there is a firmware issue? With the unit being surround sound Have you tried running in 2 chanels only?
Posted on Jan 13, 2015
SOURCE: Rotel rx 1050...Not working
If you are not using the 12v trigger between pre-amp and power amp make sure that the trigger switch on the rear of the RB-1070 is set to off
Posted on Feb 12, 2008
Protection means that the output stage of the amp has detected a problem. Usually this is because there is DC present on the speaker line indicating blown outputs. Figure on $25-$45 for parts plus the local labor rate for the repair.
Posted on Sep 09, 2008
SOURCE: rotel rsp 1098
Just look at its connections. If the input connections have any loose connections at both ends, of the graound connection to both the devices are not proper, this kind of fault [intermittent sound and static noise] can occur.
Reconnect all the connections and check the connection wires. OK.
Posted on Jan 20, 2012
Tips for a great answer:
May 02, 2016 | Rotel Rsp-1068
Feb 20, 2016 | Kenwood Audio Players & Recorders
May 16, 2014 | Sony CDP-CX300 CD Player
Mar 27, 2012 | Audio Players & Recorders
Jan 19, 2012 | Rotel Audio Players & Recorders
Apr 20, 2011 | Audio Players & Recorders
Mar 25, 2009 | Rotel RX-965 Receiver
Nov 12, 2018 | Rotel Audio Players & Recorders
123 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: