Can't figure out how to change phone language from Spanish to English on new Motorola F3.

Service codes Motorola CDMA: w150, w150i, w170, w170c, w200, w210, w355:

Set English language:
1. Menu
2. Down 7 times, Right soft button
3. Down 3 times, Right soft button
4. Down 1 times, Right soft button
5. Down 4 times, Right soft button
6. select language now

I cannot say. But the the "language" in Spanish is "Idioma". It good that you don`t changed it to Arabic. Try to search in menu :)

All you have to do is start your menu from the begining, in timing advance to the language menu(if possible refer timing with the manual) scroll down and select- Anglais, press ok, there you are.

press menu- settings-setup
the spanish word for language is idoma press on this and the list of languages will be shown. select english and save

how do i change to english

Just go to Meniu principal (main meniu) select Configuración (settings) click SELECCIONAR (select) then scroll down to CONFIGURACIóN INICIAL (initial setup) click SELECCIONAR (select) again and then scroll down to IDIOMA (language) and from there select english, thats it.(Or just go to the Motorola web site and download the full manual and used icons shown there to get where you wanted to go. )

Settings Menu - El Menú de las escenas
Initial Setup - El Arreglo inicial
Language - El idioma
English - Inglés

Hopefully that should point you in the right direction.

you usually can't change the language but you could try searching on google for english firmware

http://safemanuals.com/annexe_Quick%20Start%20Guide_MOTOROLA_MOTOFONE%20F3-_E.htm

if you click on this link there is a PDF file you can download with the english version of the manual.

I hope this helps

If you do buy this phone, you can download the English-language manual from the Motorola site. Pressing "3" at the first prompt will set the language to English on most versions of this phone. If you've already set the hour, etc, I'm not sure what to do, I'm still looking it up.

I've got two of these phones. For one of them, I did not know to press 3 at first startup and now I'm stuck. For the second one, the first button I pressed was 3, and it switched to english just fine.