Question about Frigidaire Dryers

1 Answer

I have a Frigidaire Affinity electric dryer model number FASE7021NW0. It suddenly began giving error code E61. I called frigidaire. they said it was likely a shorted wire and put me in contact with an

Unit is only 2 years old

Posted by Doug Anderson on

Ad

1 Answer

Frigidaire

  • Official Brand Answer
  • 2,267 Answers

I appreciate your post, Doug Anderson! From the information you have provided your Frigidaire dryer is displaying an error code of "E61". "E61" stands for heater relay failure which could be a problem with wiring, heater relay, or main control board. I would recommend performing a reset on your dryer and you can do that by disconnecting the power cord for ten minutes. This should help clear out any potential false error codes. Hope this information is helpful. -Matt

Posted on Dec 23, 2014

Ad

5 Related Answers

robert samples

  • 1314 Answers

SOURCE: Frigidaire Electric Dryer error code "dr"

try pressing options and select for ten seconds loc shouls come on then do it again to turn it off also check to see if the door is closing properly and that the door switch is closing and let me know i cant find no dr code so i dont think an error code i suspect it has something to do with the door closing

Posted on Jan 24, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: frigidaire affinity dryer problem

message "ad" showing on my affinity frigidaire, anything wrong with this?

Posted on Sep 27, 2008

Anonymous

  • 1 Answer

SOURCE: My Frigidaire Electric Dryer keeps giving an error code

If your dryer is the same or similar to mine (Model AEQ6000ES2) then error E68 is a stuck key on the keypad. This may be mechanically stuck or the membrane contacts. The simple solution is to replace the keypad.
I found this information by searching for "Frigidaire Model AEQ6000ES2"

Posted on Mar 30, 2009

TheMobilian

Dan Webster

  • 8220 Answers

SOURCE: Frigidaire Dryer only runs on "low Heat" setting

Mexitronics

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Posted on May 20, 2009

TheMobilian

Dan Webster

  • 8220 Answers

SOURCE: how to replace fuse dryer frigidaire affinity

If it is like any other frigidaire dryer it is mounted on the upper right hand corner of the rear bulkhead.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Posted on Jun 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i find out the year my a/c unit was built?goodman a/c unit ?


Year model is the first 2 numbers in the serial number on the placard.

Aug 23, 2014 | Goodman Heating & Cooling

1 Answer

Insulation breakdown


Hi.

I have not seen a subzero unit that could not be repaired, even thirty years old unit can be repaired. With that being said, I would call subzero directly to ask for a certified servicer in your area to take care of your unit. Here is a link for their website to help you Contact and Support they will get you a person knowledgeable to correct your issue. FYI not everyone can work on SubZero unit. This unit if 12 1/2 years old is just a teenager to this manufacture, no worries. They can last over 30 years, I have seen them and repaired them.
I am here if you need help in SoCal.

I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

Jun 08, 2013 | Sub-Zero Refrigerators

1 Answer

Where can I find the specs for an earlier Goodman heat pump?


You say 2 to 3 years... I'm assuming the unit is older than that. Especially being r22. What about the first 10 years??? Normally you will get 400 to 500 sqft per ton of cooling, but, that depends on heat load calculations. If the unit wasn't big enough you would have had this issue 10 years ago, not when the system kept running low on refrigerant. At first guess I would say a 2 ton unit is not big enough but if it worked fine for 10 years...wuth all that in mind, if it were me, (a seasoned professional) I would spend 1800 to fix my 15 year old r22 unit before I spent $4000 on a new r410a piece of junk. Best Wishes!!

If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

Jun 29, 2017 | Goodman GMS90703BXA Heater

1 Answer

I have a Servi-star 40 Gal. electric SN# SS 0496B15258, How old is this unit? Thanks, Jim


http://www.buyerschoiceinspections.com/water-heater-ages
There seem to be 2 possible answers: Servi-star vs Servistar

Answer #1: Servi-star by American
1st 2 digits are year, 2nd 2 digits are week

This means water heater was made year 2004, 96th week ....it seems wrong.

Answer #2: Servistar by Craftmaster
1st 2 digits are month, 2nd 2 digits are year

This would mean your water heater was made 4th month of 1996

Which answer is true? 6 years old or 14 years old
If tank had 12 year warranty and came with 2 anode rods, and you have good water, and no stray current on pipes, then tank can last 14 years.
If tank had 6 year warranty and came with one anode rod, and you have hard water and a water softener, and you never changed anode rod or drained tank, then 6 years is a long life for the tank.

Oct 07, 2010 | Rheem Water Heaters

3 Answers

I HAVE A GOODMAN MODEL CKL36-1D I'M TRYING TO FIND OUT THE SEER RATING ON THIS MODEL.CAN ANYONE HELP?


Your going to need to know the age of the unit. If its less than 5 years old, its most likely a 13 SEER. If its anything more than 5 years old, its most likely a 10 SEER. If its anything over 10 years old, its most likely an 8 or 6 SEER.

Remember, that a unit will loose an average of 1-2 SEER for every full year of operation. This is just due to age, wear and tear, and usage.



So, if its a 10 SEER unit that is 7 years old, you could say that it is about as efficient as something in the 4-6 SEER range.

Jul 12, 2010 | Goodman CKL36AR36 Air Conditioner

1 Answer

2 year old Kenmore freezer won't keep cold. It


Check underneath the unit and make sure the compressor is running and that the compressor fan is turning.

Oct 15, 2009 | Freezers

1 Answer

Is there a reset switch for Decor Electric oven? Kids turned on self clean and read out stopped working. Unit is at least 10 years old.


You can reset the oven by shutting down the breaker for the unit for an hour or 2, if your oven is over ten years old it might not help, the board could have been fried, good luck

Jul 15, 2009 | Dacor Ovens

1 Answer

I have a rhobi strimmer only 2 years old wont start


I presume this is a petrol one. The fuel can dry in the carby and stop the unit from starting. Use fresh petrol.
I am not sure about the ryoby unit, but if there is a air filter, take it out and dip it in petrol, then try to start with the normal proceedure in the manual.

Jun 16, 2009 | Homelite Mighty Lite Lawn Trimmer

1 Answer

Humidifier measuring wrong %


This will need to be serviced. LG has a 5 year warranty on these models. They usually will tell you of a service center nearby which will service it free of charge since it is under warranty. If you do not live near a service center they may ship you a replacement and you send your old dehumidifier back to them. Make sure you have your reciept when you contact them so they can verify it is 2 years old.

Aug 03, 2008 | LG LD65EL Dehumidifier

Not finding what you are looking for?

Open Questions:

0 Answers

Frigidaire faqe7011lw0 dryer having issues, not heating up and shuts off after 10 minutes My dryer model number is faqe7011lw0. It seems to start up, and then after about 10 minutes, consistently, it shuts off and has a bunch of blinking lights on the right side of the control panel. It started off with an error code of E4A which states "The drying time has exceeded program time for that cycle". I got that code to go away and then i got another code of "E4B" which states "Temperature reading of control thermistor has not changed in a certain amount of time". The second error code makes more sense because I notice in the 10 minutes that it runs, there seems to be no heat, so i feel something is causing the dryer to not heat up. The troubleshooting for this states to test a relay on the control panel, but I wanted to see if anyone else had this issue before. The weird thing about this is, if I run the dryer empty, the cycle completes the whole way through, but with wet clothes, it shuts off exactly at 10 minutes, no matter what cycle i set it to. I thought maybe this was a sign I had too large of a load in, so I took out about half the clothes, and ran it then. I still got the same issue. So I am kind of confused why when I run it empty, I get the full cycle with no error code, but with anything in the dryer at all, it stops after 10 minutes and gives me an error code. FYI, I have check the exhaust too to make sure it isn't clogged with lint, and it is wide open.

Mar 18, 2019 | Frigidaire Dryers

Dryers Logo

Related Topics:

1,031 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dryers Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Are you a Frigidaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...