I recently bought a store that has a camera system installed. I dont know that password for it. I would like to recover the password or even rest the the DVR to factory defaults.
Will need a model number. H264 is the compression format.
I’m happy to assist further over the phone at https://www.6ya.com/expert/christopher_101fbc448ddafa3d
SOURCE: I have an Eyemax DVR 9120. I forgot the admin
c:\windows\dvr2 i think is the file that saves the password
SOURCE: I changed the admin password
http://computarganz.com/product_view.cfm?product_id=389
Hi at this link above is your manual. In this manual it shows you how to reset the password.
SOURCE: Don't know access code. Bought used control panel
2. Unplug the transformer and disconnect the battery.
3. Simultaneously press and hold Cancel, Clock Set, and
Minutes +.
4. Restore power to the panel with either the battery or the
transformer while pressing these three buttons. The
panel announces “Hello. System XX OK.” Release the
buttons.
5. Connect the remaining power source to the panel.
- AlarmProfessor.net
SOURCE: I forgot the password for my Defender Sentinel1
It can be reset only by the company and not others. Contact the care center to reset the password.
SOURCE: how to reset password for q-see dvr model qt426
try to remove the cmos back up battery inside the DVR and install back the battery in invert position to short the polarity. Leave it overnight and install back the battery in the proper position and turn on. tyr to log in USERNAME: admin PASSWORD: 123456
3,571 views
Usually answered in minutes!
Digital ID View IV-1611ZAECO
×