I have a IC-756pro and the cat system won't work? Is it something easy to fix or only the factery

You have to modify this radio to operate outside of the HAM bands. You will likely find the modification at www.mods.dk. This is a pretty common and easy modification for HAM radios. Your performance may not be as good as in the HAM bands.

You do this MOD at your own risk. If you are not licensed for operation on ANY frequency or band, you are not legally allowed to transmit. Heavy fines may be levied against you.

check antenna connection and power output of your radio.

That Ham radio can be programmed by any competent Ham radio dealer. Try this one: www. eham.net and search for your radio.

any ham radio store can fix them. or can send to the factory. and the good thing about amateur radio is individuals cant charge you to fix it.. LOL.
just for price of parts.

I used to run HRD before Simon sold the rights to the software to a guy in Florida. He now charges for the software. Since your question has been posted recently, I assume you're running the paid version. I suggest you contact customer support. Alternately, you can also go to QRZ. com and join their forum and ask your question there. The new owner of this software frequents that forum . Good luck!

I would have a look at the FT-857's extended service menu by holding in A, B, C buttons and pressing power button for a couple seconds. The default setttings are on the mods.dk website. Should also ensure regular menu settings are correct/appropriate. I can tell you that it is possible to change extended menu settings by getting RFI into radio. Also, although unlikely, it sounds like you could inadvertently have done a write to the radio's EEPROM, which can be determined by using a program such as Ham Radio Deluxe, a CAT cable, and procedures also posted on mods.dk website under how to open radio up for 60m, ext tx/rx, without any hardware mods. As to whether you can do all this while still mounted mobile,,,,,maybe with a laptop? Good luck, Link, WV4I....

if you have short, maybe your have a IC amp short inside. You must go to the repair shop for fix it. The speaker you can test in another system.
God bless you

Hi,

You seem to have a bit of a problem here, but do not fear.

May I suggest the following: join yahoo group specific to your radio Make/Model, where you will receive expert info from professional people in the field. Plus you can down load manuals, diagrams and software, just to name a few things, freely.

I hope this will help you.

Best regards,
Peter

Hi,
To help you resolve this issue, the best advice I can give is to: join yahoo group specific to your radio Make/Model, the team there will help you with expert advice and info, plus you can download goodies for your radio, all is free.

I hope I have assisted you.

Best regards,
Peter

There is a software program call proximus that will allow you to control your IR receiver with the necessary remote codes for the 9537. it\'s a pain to figure out . but it does work. I use mine with Orbitron satellite tracking software to follow Ham radio satellites.