How to play a dvd when screen frozen to word "photo"

I'm not sure the question - perhaps your TV is set to the DVD2 input and it's not a DVD issue.
If so, using your TV remote, push the "input" button until you reach your desired input.

The optical input needs to be assigned to an input. The default is "none". Set the system up as if you were going to watch a DVD. Press "System" on the remote (it's recessed). And on screen menu should come up. Move to the right and highlight "Media Center". Scroll down to "Optical Source". Choose the input you want. When done press "Exit" on remote.
Please rate!

Hi shikaan the problem lies in the connection try to connect the cords in other use the yellow, white cord accordingly. From deborah

I am having the same problem. Did you figure it out?

Found on another board, tried and it worked on my Medion
P70002 / MD84100 DVD recorder:

Turn on DVD recorder
Press HOME on remote
Go to SETUP in Easy Menu
Move down to padlock icon
Press 0 seven times
Message appears:

Congratulations!
Region Change Free!
YES (press ENTER)

It now plays US and UK as well as Australian (in my case).

try turning the channel up or down with the tv remote to input 1 or 2 depending on which one is being used for the dvd player. tv should use input 1. dvd should be on input 2.
when turning the channel set it to show the dvd screen, then go up 1. if it doesn't show, return and go down 1.

It is not a permanent hack, you will have to to it over for every movie you put in.

1. When "REGION CODE ERROR" shows on screen after you've input your wrong-region DVD you push "ON SCREEN".

2. When the DVD-menu is showing push "ON SCREEN" again and another DVD-menu will appear.

3. Move the arrow over to the clock and press enter. The menu asks for "TIME" and you write 0:00:00 and push enter.

4. You will now see the menu for the movie. Remove the DVD-menu by pushing "ON SCREEN" once. You can now watch the movie.

Don't think theres a pernament one for this player yet but i'll try and post it on here if i ever find one. Sorry.

I notice this was made in 2008 and I hope you have found the answer. But if you or others have not here is my answer. Are using the RCA cable from the output on the DVD Player and you have plugged it into the RCA in ports then you need to use the remote to move through the on screen menu. My INSIGNIA has a Source List menu on the remote that shows on screen. I can scope through the MENU for TV, Composite Side, S-Video Rear, S-Video Side, Composite 1, Composite 2, VCR, HDMI 1, HDMI 2, HDMI 3. That is found using either the INPUT button on the upper left on the remote or the buttons; VIDEO, COMP, HDMI, AND TV across the top of the remote. Hope this helps.

It is not a permanent hack, you will have to to it over for every out of region movie you put in.

1. When "REGION CODE ERROR" shows on screen after you've input your wrong-region DVD you push "ON SCREEN".

2. When the DVD-menu is showing push "ON SCREEN" again and another DVD-menu will appear.

3. Move the arrow over to the clock and press enter. The menu asks for "TIME" and you write 0:00:00 and push enter.

4. You will now see the menu for the movie. Remove the DVD-menu by pushing "ON SCREEN" once. You can now watch the movie.

suggest unplug Bose system from the wall for 10 secs, then plug in and allow it to initialise.
if this fails take bose unit to dealer.