Question about Acu-Rite Acurite Wireless Indooroutdoor Thermometer 00606

2 Answers

Model 00754W4 does not sense outside temperature..new batteries have been placed correctly in both inside and outside units..noW what do I do?

New batteries. Shows time/day and indoor temp but not outdoor temp

Posted by Lynn F Murphy on

Ad

2 Answers

AcuRite

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 20 Answers

We would recommend a reset of your unit. Please verify that you are using good-quality, standard alkaline batteries such as Energizer or Rayovac, then follow the steps below.
1. Bring both the sensor and display unit indoors and remove at least one battery from each.
2. Make sure the A-B-C switch on both units match. Sometimes changing to a different channel can help.
3. Reinstall the battery in the outdoor sensor.

4. Reinstall the battery in the display unit.
5. Let the units sit within a couple feet of each other for about 20 minutes to gain a strong connection.
If you need any further assistance, please contact AcuRite Customer Support at 1-877-221-1252 or [email protected]

Posted on Mar 17, 2015

Ad

Tom Chichester

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Acu-Rite Master
  • 57,253 Answers

A common requirement for this type of unit is to install new batteries in the outside transmitter first, allow time for it to begin "talking" to the inside receiver, install batteries in the inside receiver and check for results.

Posted on Dec 03, 2014

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BAR888A -Changed batteries house (1st) & outside unit(2nd.) Now inside unit not receiving signal. Only thing registering is inside temp. Outside unit is also showing temp.


Remove all batteries. Install batteries in outside unit and allow time for it to begin sending temperature. Install batteries in inside unit. You should see outside temperature displayed. If not, the outside unit could be defective.

Sep 25, 2018 | Measuring Tools & Sensors

1 Answer

The outside temp won't show up on my new weather station


  • Remove all batteries
  • Install batteries in outside unit and wait for it to begin sending temperature signal to inside unit.
  • Install batteries in inside unit. You should see outside temperature displayed.
  • If this doesn't work, the outside unit may be defective.

Apr 04, 2018 | Measuring Tools & Sensors

1 Answer

No outside temp in de display only - - -in thedisplay i see the room temp. No outside temp. I have checked the outside transmitter end i see the red flash.


my unit tells me to insert fresh batteries into the outside sending unit first. then insert new batteries into the inside receiving unit. after the outside temperature shows up, then can reset my inside unit's time, choose F or C and
switch channels. please try changing channels if your
outside temp doesn't show. you can do both units in the house then put one outside after they work properly.

Mar 29, 2018 | Home

1 Answer

SS 5010 not sensing outside temperature. I replaced the batteries in the transmitter and pressed the TX. However, the display inside just keeps blinking. I can see the inside temperature.


Inside temp is separate from outside...no connection whatsoever. If the outside transmitter has new power and fails, it may have gotten wet inside and may be rendered useless. Replace with a new outdoor transmitter.

Jan 31, 2018 | Measuring Tools & Sensors

2 Answers

Why is indoor display not showing outside temperatures?


If the condition comes and goes, the outside unit may be exposed to extreme temperatures or the batteries may be too weak. If the condition occurred after battery replacement, remove all batteries then reinstall the outside battery and wait for it to "initialize" and begin sending data. ReInstall the inside battery and you should see the outside temperature displayed.

Feb 13, 2016 | Measuring Tools & Sensors

1 Answer

Very cold outside. The filter and operation buttons are flashing. We changed the battery in the remote. Lights continue to flash.


defrost outdoor unit, quickest way put unit onto full cooling inside and it will send hot gas to outdoor unit, once unit is clear operate as required the cause of this could be a gas issue fan motor issue.a sensor not sensing correctly and not putting unit in to defrost or infact unit is far to small for area it's serving, set temperature to a manageable temperature not all the way up to the max and see how this goes, if it persists gas charge on unit should be checked to see if there is a leak. And fan should be checked to ensure correct operation.

Jan 01, 2016 | Filter Heating & Cooling

1 Answer

Do you have to change batteries on clock inside house along with outside batteries to get correct outside temperature


My most consistent (best, repeatable) results with this process are to replace both sets of batteries, both in the clock and in the outside temperature sensing unit. Start by removing all batteries out of everything. Now replace the batteries in the outdoor unit, then (within 30 seconds) replace the clock batteries. The temp unit should begin communicating normally within 5 minutes (or less) and yes, you will have to reset the clock,

Nov 01, 2014 | Lacrosse La Crosse Technology Wt-5220u-it...

1 Answer

I have eight atomic clocks,none of them have the outside temperature working,all have new batteries???


If your outside temperature is not showing on your clock, that may mean that the clock and the transmitter have lost their connection. To reconnect them you must first take the batteries out of both of the units for 15 minutes. First put the batteries back into the transmitter, and then the clock. Let them sit side by side inside your home. When both the indoor and outdoor temperatures show on your clock with the same reading, or within two degrees of each other, then you may put your transmitter back outside. Remember to keep the transmitter out of the direct sun in a dry place. Also keep it away from metal, which can affect the readings.

Oct 20, 2014 | SkyScan 86742 Digital Atomic Wall Clock

2 Answers

Outside temp does not read new batterys in both inside & outside unit


Double check the batteries to make sure they are installed correctly. If one of the batteries in the outdoor sending unit is in backwards, it will not send the outdoor data. On the indoor unit, there is typically one battery that is used for receiving the signal from the outdoor unit. If all of the batteries are in correctly but that one, you will see the display and the indoor temperature information, but the outdoor information will not be displayed.

Aug 21, 2010 | Acu-Rite AcuRite IndoorOutdoor Wireless...

Not finding what you are looking for?
Acu-Rite Acurite Wireless Indooroutdoor Thermometer 00606 Logo

1,676 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acu-Rite Measuring Tools & Sensors Experts

Brad Brown

Level 3 Expert

18438 Answers

David Gust

Level 2 Expert

181 Answers

ray gallant

Level 3 Expert

69133 Answers

Are you an Acu-Rite Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...