I have samsung smart tv, i will like to use Kenwood VR 305 to be sround system.
SOURCE: Kenwood VR-715 reset?
Hello llarosa,
Yes, there is. Unplug the power cord from the wall outlet, then
plug it back in while holding down the POWER ON/STANDBY key.
That will clear the contents of the memory, reset the microcomputer and take the unit back to factory settings. Hope this helps. Let me know.
cancerags
SOURCE: My kenwood VR 305 will
Hi..
Here's the link for the manual.
Also, try brand-new batteries and make sure they're in right.
Even I do that wrong sometimes
http://inform3.kenwoodusa.com/manuals%5CVR306.pdf
SOURCE: kenwood vr-305
Hi...
manual link here
Check the Problem pages
http://inform3.kenwoodusa.com/manuals%5CVR306.pdf
VR305 is included
the memory in the speaker setup might need to be reset
SOURCE: I have a kenwood vr
Kenwood receivers recently have a commonly known problem with its receiving IR diode within the receiver, to fix this you will have to re-solder the connection on the receiver panel within the faceplate of your kenwood receiver.
Instructions to fix it are at the following link if you are willing to open up your receiver and repair it. lots of people have reported this fix as successful so it is widely believed to be a design flaw in the VR line-up of receivers as it has occured in all the VR families so far.
good luck.
SOURCE: I have a ps3 and a samsung flatscreen im using an
Connect cables from your flatscreen TV (or monitor?) to the receiver's audio input jacks. These could be two RCA, white and red, or Digital (one single RCA cable), or optical, if both the flatscreen and the receiver have such connector. Make sure you select the correct audio input on the receiver to amplfy the sound from the game/movie/etc.
If successful, try muting the TV's audio, to prevent the sound from creating a hollow (echo) effect.
Good luck!
413 views
Usually answered in minutes!
×