Televison & Video Logo

Related Topics:

Question about Televison & Video

1 Answer

My coby lcd tv won't work for my ps3 what wires would I need to make it work

Posted by bianca johnson on

Ad

1 Answer

Francis Mason

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 87 Answers

You will need an HDMI cable. Please follow the below instructions.

Instructions

  1. Before you begin installation:
    • Turn OFF the PS3TM system using the [MAIN POWER] switch (in the back)
    • Unplug the AC power cord from the electrical outlet
    • Turn OFF and unplug the TV
  2. Connect one end of the HDMI cable into the [HDMI OUT] port on the back of the PS3 system. Connect the other end of the HDMI cable into the [HDMI Input] port of the TV or display monitor. My coby lcd tv won't work for my ps3 what wires - ps3_8_hdmiconnecttv.gif
  3. Plug in the AC power cord by connecting one end of the AC power cord into the [AC IN] port on the back of the PS3 system and the other end into an electrical outlet. ps3_11_connectacpower.gif
  4. Press the [MAIN POWER] switch on the rear of the system. A red light should appear on the front of the system indicating power is available.
  5. Turn on the PS3 by pressing the touch-sensitive [On/Off button] on the system front. The red light will turn green, indicating the PS3 is now turned on.
    Note: The blue light will also appear on the front of the system if you have a disc inserted.
  6. Plug in the TV and turn the power on. The PS3 should detect the HDMI display device automatically. When prompted, "Do you want to output video and audMy coby lcd tv won't work for my ps3 what wires - icn_btnx_color.gifelect YES and press the icn_btnx_color.gifbutton. (You may need to press the PS button on the center of the SIXAXISTM controller to enable the controller first).
  7. The next screen will My coby lcd tv won't work for my ps3 what wires - icn_btnx_color.gifto automatically switch to the optimal setting?" Select YES and press the icn_btnx_color.gifbutton.
  8. On the next screen, the PS3 will display the maximum resolution capable on the display (i.e., 10My coby lcd tv won't work for my ps3 what wires - icn_btnx_color.gifill display, "Do you accept the setting?" You will have 30 seconds to confirm your answer.2 Select YES and press the icn_btnx_color.gifbutton to save your settings. You have now completed the HDMI installation.

Posted on Dec 01, 2014

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Need fix how do i make it stop flickering

Coby lcd tv keeps flickering Flat Panel Televisions ... - Fixya

www.fixya.com > ... > lcd tv keeps flickering > Flat Panel Televisions
Coby flat panel televisions lcd tv keeps flickering related questions and answers. Ask your Coby ... Why does my Coby 40 TFTV4028 LCD TV keeps flickering.

Coby adjust air fuel mixture Flat Panel Televisions ... - Fixya

www.fixya.com > ... > adjust air fuel mixture > Flat Panel Televisions
Coby flat panel televisions adjust air fuel mixture related questions and answers. Ask your Coby ... Coby 32 in tv ... to last channel, and will stop, and will display the first channel it has got. Then we have to make adjustments on channels. ... Ad. Question about 40 TFTV4028 LCD TV. 1 Answer ... Flickering can be adjusted.

Won't turn. on red standby light changes to on but then


0helpful
1answer

My remote does not work

Remote Code for LCD Coby TV model TFTV2425 - Comcast Help and ...

forums.xfinity.com/t5/XfinityTV.../Remote...LCD-Coby-TV.../916553
Apr 14, 2011 - Remote Code for LCD Coby TV model TFTV2425 ... If your home entertainment device does not respond to the remote control after trying all of the codes listed for your ... I just changed to an hd box andcodes given by comcast did not work. Looked at my old remote notes and that is what I found and it works. Comcast DVR remote won't "select" an input from th...
May 26, 2011
Remote code for coby tvs
Feb 7, 2011
Comcast remote code for Coby tv/dvd
Mar 20, 2010
More results from forums.xfinity.com

Coby tv remote doesn t work Questions & Answers - Fixya

www.fixya.com > Forum > Tags > tv remote doesn t work
0helpful
1answer

How di I fix the audio on my coby tv? I can hear a scratching sound only. I was able to connect to netflix via my ps3 and the audio worked. Is this something you can assist with

Unfortunately the failure to mention needs repair by a qualified technician. The solution that is easily accessible by changing the main board , but are now discontinued . I hope I have been helpful . Bye Bye
0helpful
1answer

I was trying to put the color bottom ,won t change the color

unfortunately the coby company has gone out of business probably because they have produced an inferior product that has had many problems, many people are posting problems with these sets. it is better you just purchase a different brand of tv and leave this heartache causing product behind.
0helpful
1answer

Coby 32" LCD TV Wire locations

What is the model?...generally you can get a service manual on Coby sets if you do some searching
0helpful
1answer

Coby no signal to ps3

yu have to selet the right input thrue the menu
0helpful
1answer

Tv won't turn on

If you have tried using different input devices, looked for loose contacts
in power outlet, RC Jack, cable and connectors, the TV might need service.
0helpful
1answer

Coby tv will not come on

Died and went to monitor heaven. U can always check out the power supply. But other than that you may need to go shopping.
2helpful
2answers

Hdmi won't work with ps3

While the PS3 is off, press and hold the power button until it beeps a couple times, that should reset the video settings and allow you to select HDMI as the output.
Not finding what you are looking for?

Open Questions:

0answers

Whirlpool Side by Side American style Fridge Freezer too hot and too cold! I have model S20D FSS10-A/D Service number 8586 161 15000 Side By side FF - and after replacing many components on the rear board 13 years ago it has been running well. However.... with a new fault I am hoping that the symptoms may allow someone to point me in the right direction. Not having a circuit diagram has been a hindrance. Over last few years the front panel inside in the fridge in my model has been developing a display fault - it started with the LED display winking out briefly about twice a second. The mark/space of time for the 'winking out' changed slowly to 50% on 50% off twice a second to eventually become just flashing on briefly twice a second and finally off all the time. However, the default settings/functioning of the FF has been working fine so didn't need to use the panel. However, can't read any fault codes that might be there I don't think that the buttons are doing anything on the panel. It has 15v supply but I don't know what supply voltage from the rear PCB should be. Then... A few weeks ago the house RCD tripped once and the fridge bulb had blown ********* stain on bulb interior and Relay RL3 was chattering randomly - I took the board out and noticed a fried circuit track where it looped thinly either side of component hole that was unused. I soldered in a bridge over the gap. Restarted the FF. From then the freezer cools to -32c and warms up to -2c and down to -32 etc.. The fridge varies in temp but does go as low as 0c and high as +9c. Alongside this, when the compressor is not running we can heard a ticking noise and identified that the compressor fan was turning slowly about ?100 rpm There's no ice build up, the freezer to fridge air louvres are opening and closing when you switch the FF on, and do seem to open and close at different times. The evapourator fan seems fine as does the compressor fan, the bottom of the fridge is dust free and the rear panels are all on to allow proper cooling of the condensor motor. I pulled the board again, checked all the capacitors I have a slightly different board to many and all the capacitors I had used from one brand have failed again. I took all the caps out and measured them. C6, C16 should have been 0.68uF and were in the order of a few nF C14, 26, 27,28 should have been 0.1uF and were 0,.6nF, 2nF, 10nF and 38nF respectively. All other film and electrolytic capacitors were within tolerance. I replaced all the faulty caps thinking that I had found the display problem because you had told me in the past that C6 and C16 relate to the front panel and the cooling issues and fan issues but NONE had been cured :- I checked the continuity to the front panel of all connectiions and they're fine. Also checked the 2 electrolytics on the front board. So I am at a bit of a loss. I have checked the zener diodes in situ and all have about 6v forward voltage drop I cannot find a replacement board due to different connectors on my unit - so unless I can fix we will have to fork out for a new FF :-

98 views

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Cindy Wells

Level 3 Expert

6559 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...