Brought cable as said could use with iPad to tv. I have put cable connection into my iPad then the yellow, red and white cables into my TV, but can't get any picture from Netflix on my TV. Infact when I take the cable out of my iPad Netflix works when I put it back in it stops. With the connection that goes into my iPad there is another cable a usb connector that is removable do I need another adaptor to make use of this connection then a HDMI cable that will go into my TV.... Pls help and Thx in advance
SOURCE: No Sounds when connect XBOX 360 to HD port
you need to run the white & the red to the aud. input
SOURCE: Hooking up a PS3 through HDMI
what you have to to is hold the start button till the TV shows 480i then you will have what you need, it will set up for your tv
SOURCE: Connecting Wii to Emerson 37 in LCD tv
Finally found the correct point of entry to tv and correct channel on my own.
If the power indicator doesnt come on at all then chances are its the power board if the standby supplies are not present.
Testimonial: "is it easy to install a new one by urself? "
Hi! There are 2 places to find the info you need. Your TV Manual, if u got one, these days they expect you to go online and look at a PDF document rather than include it with your item. So its possible both your IPAD2 and your TV didnt have manuals in their boxes and you'll have to go online to the website for the brand name of either of your items. I can tell you that my camera that i connect to my TV came with a cord that had the 3 colored plugs(red, white, & yellow) on one end and the other end plugged into where you charge the camera or possibly a USB port on your IPAD2 . Without knowing the exact brand and model # of your tv thats the best info i can give you. GOOD LUCK!
175 views
Usually answered in minutes!
Have you checked the settings on the ipad to make sure those are correct? Or the settings on the tv as well? When I used mine, I had to change the settings on my tv to accept the 1080p so it would work
No not on iPad or TV settings . What do I need to do for iPad and TV go into setting on iPad and change to what same for TV pls . Sorry to be a pain but not tech minded at all.
It's ok. For the iPad settings, you go to "settings" than "general" than "tv out" to "tv signal" and make sure it's using "NTSC"
Keep in mind these only show up when the cable is connected
Also, doing further research into this, just to make sure, what kind of tv are you using?
Hi it's a Sony bravia KDL 40V3000 . Many Thx
Okay, are you using Airplay MIrroring?
No, don't even know what that is ??
Okay, it's another thing on the Ipad that may fix the problem or may cause issues... when you swipe the screen and the control settings pop up, do you see an option (should be second row on the right) that says "airplay"
Can't see anything I have all apps on front screens looked in settings but can't see, however I might not be looking in the right section
okay, try double-clicking the home button to display the recently used apps, swipe through them twice from left to right until you see the airplay icon (attached a picture of it) than tap the icon to see if the mirroring is on or not =)
No icon like that, I have a ipad2 not air or anything like that. Are you in the UK?
I'm gonna have to leave soon and resume tomorrow as I've work in the morning. Thanks ever so much for your time Danielle I appreciate it
×