I changed out the Tcon, no change. I swapped the t-con ribbon cables, no change. I unplugged one ribbon, pure white on that side, no black line across. Tried different inputs. On the blue screen upon startup it isn't there? On snowy screen it is. ugh
If this is done with every input of your tv and also with tv channels this means a bad circuitboard .You can find on ebay one and mod it yourself. Its not such a difficult thing.
Testimonial: "Takis Kalas: Do you mean the mainboard?"
SOURCE: Sharp Aquos LC-32D41U
The unit has bad drive ic's,which is part of the lcd panel.It is not cheap to fix.
SOURCE: Screen damaged from fall, colored vert lines on left side from the damge
Unfortunately the LCD panel would need to be replaced. Even if there is not any signs of damage to the outside portion of the panel, one of the inner screens may have been fractured. I am not sure if the panel would be available because if i'm not mistaken Sharp just started making replacement panels.
SOURCE: My 52 inch sharp aquos has green and black
Try different source like VCR, DVD, or satellite to see if it is the source thats bad. Check to see all your connections are on good and tight. If still no luck, then your tele is fu.k.d and you got bad LCD crystals or faulty inverter. Take the thing back to the store for exchange or refund if your within your 30 day window. Call the manufacturer if your within your 1 year window.
SOURCE: Dead Pixels on Sharp Aquos 70" LED TV
If pixels are gone on all channels - Exchange it
Can't fix it yourself unless you are tv technician
It is quite common for few pixels to be dead but that is usualy not noticable
411 views
Usually answered in minutes!
Takis do you mean mainboard when you say circuit board?
×