Should be under input on the remote
Testimonial: "I don't have remote"
SOURCE: aux in kenwood kdc 135
Read in the back of the manual in troubleshooting. It's the first FAQ there.
SOURCE: hey jeff about the kenwood
In standby you have to hold menu doen untill menu appears on screen, Scroll to aux and turn it on :)
Don
SOURCE: aux location
There is a RCA cable that comes off the back of the radio and also another cable for 3.5mm (mini-stereo jack) that also comes off the back of the radio. The RCA jacks can be used for "AUX" or "Sub-woofer" and the 3.5mm jack is just for "AUX". Your ipod can use the audio output jack or the headphone jack and plug that into the 3.5 mm jack on the back of the radio. You will need a "3.5mm male" to "3.5mm male" stereo cord that can be purchased at Radio Shack or Best Buy. Then you select "AUX" on the display with the source button to listen to it. You may need to go into the menu and activate the "AUX" input. Check your owners manual for details.
SOURCE: turn aux on on kenwood kdc-mp205
In order to access the AUX option the stereo needs to be in Standby mode. To do this just hit the SRC or source button until you reach the Standby option. Now hit the menu button and scroll up or down until you reach the AUX on/off option and just turn it on. Hope you find this helpful.
SOURCE: how do i turn on the aux feature for my kenwood
Page 13 Auxiliary Input Display Setting.
http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/KDCMPV7019.pdf
Yes, the KDC 319 is covered in this instruction manual.
212 views
Usually answered in minutes!
×