Sometimes the bluetooth of different devices will simply refuse to pair, it's an old, known problem to which there is no fix.
Just use another older phone.
SOURCE: When I try to pair my Nokia N96 phone with the
Delete the memory of the last phones connected, hold down red and green
SOURCE: I have a new phone nokia 6303 and tried pairing
you need to go to settings / paired devices / delete any old phones that are still stored as the parrot will only allow 5 paired devices. then try again. You may want to check your software and if your software is over 12 months old it will be a good idea to update your parrot, try parrot.com/support for more.
Dan
SOURCE: Memory full on Parrot CK3100
turn ignition on in car push and hold green and red buttons together fro 10 seconds, the kit will say memory erasing in progress, then please pair device, then pair phone..
SOURCE: pairing a Parrot CK3100 to Iphone 3GS
My iPhone 3G is now connected. Did 3 things:
1. Deleted every existing paired device on the Parrot CK3100.
2. Pressed all 3 buttons at once. Parrot CK3100 screen lit up and buttons lit up after about 5 secs. Turned car engine off. Parrot switched off. Turned car on again.
3. Went to settings, advanced settings, pair device (and also switched on iPhone bluetooth) and tapped Parrot CK3100 on the iPhone screen (which had now appeared) - phone connected.
After about a minute sync iPhone phonebook appeared on Parrot.
Hope this is helpful.
240 views
Usually answered in minutes!
×