HOW TO CHANGE THE LANGUAGE FROM GERMAN TO ENGLISH canon 6035

caranya anda harus mengganti epprom yang terletak di dc control,, ada 2 epprom di dc control anda bisa melepaskannya seperti ic yang agak besar dan panjang, anda harus mencari jasa upgrade firmware ubah bahasa, bila susah mencarinya, anda harus mengganti dc control tersebut 1 unit.

how to change language to gp 215 canon german to english

Hi owole2. Try looking for the settings from the copier. then look for language settings.

Yes, Take it to a shop. It is easy and simple.

hi. you have to go into the set up menu and find the language function. Then scroll down until you find the language u want and click on it. J.

Here ya go:
What you will see
The printer display is not in the required language.
What to do
To change the language on the display back to the required language, do the following:
Steps Action 1 Power the printer off and back on. 2 Press the down arrow button () four times. 3 Press the button once. 4 Press once. 5 Press once. 6 Press once. 7 Press the left arrow button () or right arrow button () until you see the desired language. 8 Press the return button (). 9 Press once to save the new setting

Press the menu button and scroll through until you see
"Sprache". THat's German for Language. Find the language of choice and select it. You can find the translations for what you need here : http://babelfish.yahoo.com/translate_txt

camge the eprome in dc controller. first get a copy from the language you want and install it in your machine.

Here is a link to support, just type in the word "language" and search. It will show you how to change it back. You can also search for "reset" and change it back to factory default, but you will lose any setup information like your fax number.

CLICK HERE

not sure you can????
Anyway to get into service mode,
open front door
bottom left next to green knob there is a pinhole
insert paper clip and push on switch
you should be in service mode
if not you must cheat the front door while it is open (folded paper in slot will do)
then go through the steps

once in service mode you should be able to scroll and check for language