Question about Electrolux Washing Machines
What is the problem?
Insufficient heating measured by the main board during washing cycle and also during drying cycle at washer-dryer.
Could be faulty: heting element, pressure switch, NTC sensor, printed circuit board (PCB),
wiring between PCB - heating element,
wiring between PCB - NTC sensor,
wiring of pressure switch.
Posted on Jan 06, 2015
SOURCE: error code e60
Hi I had this on my zanussi not long ago I pressed the reset button in for 5 seconds and it stopped . The computer board needed resetting. Hope this helps
Posted on Jul 08, 2008
thas a question that the manufactuer should be able to answer for you, ifnot the dealer that your goingto purchase tehunit through should be able to get you those specs.
Posted on Mar 12, 2009
E50 is displayed if the there is no drum rotation. drum jammed not allowing motor to turn/ no circuit through motor(poss worn out carbon brushes) less likeley but poss short on motor relay on electronic board.
Posted on Jul 24, 2010
Tips for a great answer:
May 03, 2016 | Supra Washing Machines
Feb 21, 2015 | Electrolux Washing Machines
Aug 29, 2014 | Electrolux Washing Machines
Aug 21, 2011 | Washing Machines
Jan 12, 2018 | AEG Washing Machines
Aug 12, 2010 | Washing Machines
Jul 24, 2010 | Electrolux Washing Machines
Mar 12, 2009 | Electrolux AWF1235 Front Load Washer
Sep 06, 2008 | Electrolux EW1200i Front Load Washer /...
186 people viewed this question
Usually answered in minutes!