Question about Eaton Powerware 9130 UPS Battery
SOURCE: site fault
If UPS is displaying "Site Fault", it is doing its job correctly. Yoiu need to check the wall receptacle. Probably hot and neutral reversed by whom ever installed the wall receptacle.
Posted on Apr 13, 2010
The Poweware UPS is a true on-line UPS System, so it will handle sustained over and under voltages to +20% and -15%. If you are getting input spikes, the UPS has MOV's which will handle input spikes, and if too great a spike, the MOV will die attempting to save the UPS output load. If you are having further UPS input problems you need to put a good quality surge arrestor at the panel feeding the UPS on BOTH circuit legs feeding the UPS.
Posted on Feb 08, 2011
Tips for a great answer:
Sep 25, 2014 | Powerware 9120 UPS System
May 01, 2014 | Eaton Powerware® 9120 UPS System
Feb 06, 2018 | Eaton Powerware® 9120 UPS System
Jul 15, 2011 | Powerware 9120 UPS System
Jun 30, 2011 | Powerware 9120 UPS System
Oct 14, 2010 | Powerware 9120 UPS System
Feb 22, 2010 | Eaton Powerware® 9120 UPS System
Jun 05, 2018 | Eaton Computers & Internet
1,710 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: