Type in phone contacts

It is possible you have predictive text switched on.

I suggest you check your instruction manual.

In my phone it goes like this
1 open contacts
2 all contacts
3 find the name of the person
4 click on the name--open
5 click on edit in the upper right hand corner
6 scroll down to the bottom
7 click on Delete Contact

enter ur mobile phone number like this:

+61 4xx xxx xxx

here the letter x denotes the last eight digits of ur mobile phone number
ur moile phone number as mentioned is 0478 xxx xxx
so u hav to enter ur mobile number like this:
+61 478 xxx xxx
(all u are doing is replacing the first digit of ur phone number(0) with +61)

change it to insert character option type the codes ,if not works you can try codes here http://www.onlinegsmunlock.com/nokia-n70/rs7wp9/

well you can't change the mobile one. so what u do is go to the one below the mobile number where u would put the home phone number. click on the phone icon to change the type if u need to. Hope this helps

Hello idres-m

My suggestion is to hard reset the phone making sure you have backed up your contacts and images and music files. by reseting the OS on the phone reinstalls the software. If this does not work and you are still having the same key pad issues you'll have to get in contact with you network provider or the manufacture of the phone.

To perform the hard reset

Type *2767*3855# into the phone (the last four digits may appear as *'s or /) when done without SIM this will clear any phone security codes in place and reset to default. This is 00000000. It also clears and eliminates any software bugs in the ROM flash (samsung's factory flash is rubbish!) as it forces a full reload. Its always best to do this SIM out as it discharges all the circuits and resets antennas and SIM reader power cycles. ALL DATA IS LOST

Well, depending on the system that you're using, it may vary on how you change the name.

Assuming that you have a DK Strata series:

Press INTCM, #, 6, 2, 1
Press # (Changes Numbers to Letters)
Press 1 (Cursor Left)
From there just type in your name according to the numbers, and Press 0 to toggle the letter.

Press SPKR to end the process.

Hope this helped, don't forget to say thanks. :)

The Phone application on the BlackBerry smartphone automatically converts phone numbers that include letters into the associated numbers.
To key a phone number that contains letters, press the right Shift key or the Alt key and type. The letters appear on your screen, but the BlackBerry smartphone translates them into the appropriate numbers when the phone call is made.
For example, to call 1-877-BLK-BERR (1-877-255-2377) from your BlackBerry smartphone,

1. Open the Phone application.
2. Type 1877.
3. Press and hold the Alt or right Shift key and type BLKBERR.
4. Display the menu and select Call 1877BLKBERR or press Enter. When the phone number is dialed, the letters are converted to numbers on the screen.
5. To end the phone call, hold down the Escape key.

To return to the Home screen from any other screen, press the End key.
To lock the device, set a password. Hold the * key.
To unlock the device, press the * key. Click Unlock. Type your password.
To lock the keyboard, hold the * key.
To unlock the keyboard, press the * key

To switch the input language, hold the Alt key and press the Enter key. Continue to hold the Alt key and select a language. Release the Alt key to switch to that language.
To switch back to your original input language, press the Alt key + the Enter key.

I hope this helps

Please remember to rate this solution.

About fixed dialing
If you enable fixed dialing number (FDN) mode, your device only makes calls to contacts on your FDN list. Your device can dial emergency numbers in FDN mode, even if the numbers are not in the FDN list. If your service provider plan includes SMS, you can also send SMS messages to contacts on your FDN list

so if you have this enabled chances are you have to turn it off.
this is how you turn it on so you should be able to use it as a guide to turn it off.



Turn on fixed dialing
1. In the phone options, click FDN Phone List.
2. Click the trackwheel.
3. Click Enable FDN mode.
4. Type the PIN2 code provided by your service provider.
5. Click the trackwheel.

or if you wanna keep it on and add friends to the fdn



Add contacts to the FDN list
1. In the phone options, click FDN Phone List.
2. Click the trackwheel.
3. Click New.
4. Type the PIN2 code provided by your service provider.
5. Click the trackwheel.
6. Type a name and a phone number.
7. Click the trackwheel.
8. Click Save.

and finally some shortcut keys:
To open the phone, press the Send key.
To end a call, press the End key.
To call a selected contact or phone number, press the Send key. To call a speed dial number, hold the assigned key.
To add an extension to a phone number, press the X key. Type the extension number.
To call your voice mail access number, hold 1.
To type a letter in a number field, hold the Alt key.
To type the first letter on a key, press the letter key once.
To type the second letter on a key, press the letter key twice.
To turn on or turn off mute using the Mute button, press the Mute button.
To turn on or turn off mute using the keypad, press the exclamation point (!) key.
To turn speakerphone on and off during a call, press the period (.) key.
To change the volume during a call, roll the trackwheel.

Ok theres two ways to do this, heres 1 way: press menu while you our on the phone display (the button to the right of alt) use the 5 way navigator to move to the right, scroll down to phone display options. Below the Show Dial Pad/ Show Wallpaper, you'll see where it says typing dials phone number change that to typing starts contact search. This will permanently make it liek your old treo. If you wanna dial numbers press the white button to thte left of z and start dialing the numbers.

Version 2: If you dial normally it will dial numbers, if you press th white button to the left of z then type contact name also works.

hopes this help

Masalama