Kodak Esp 5210 All-in-one Inkjet Printer Logo
P
Peter Hadfield Posted on Nov 12, 2014

Kodak ESP 5210 will not print. It appears to print but no ink apparantly coming out. Took out print head and Black in appears to be split

Both new Black and Colour cartridges. It was printing fine a couple of days ago.

×

3 Answers

kf3000

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that hasĀ over 10 points.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 12 Answers
  • Posted on Jan 03, 2015
kf3000
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that hasĀ over 10 points.

Problem Solver:

An expert who has answered 5 questions.

Joined: Aug 20, 2009
Answers
12
Questions
0
Helped
2677
Points
14

If the contact area of printer head is dry and all else failed, you might have a technical problem. Contact Kodak support, they'll ask you to upload "data diagnostics" under printer tool and if technical issue confirmed, you may get a replacement printer.

Mike Johnson

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

  • Contributor 1 Answer
  • Posted on Sep 29, 2015
Mike Johnson
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

Joined: Sep 29, 2015
Answers
1
Questions
0
Helped
383
Points
21

<a
rel='nofollow' href="http://www.techsupportusa247.com/support-for-kodak.html"> Kodak
TECHNICAL SUPPORT</A><a
rel='nofollow' href="http://www.techsupportusa247.com/support-for-kodak.html"> kodak
printer support number</a><a
rel='nofollow' href="http://www.techsupportusa247.com/support-for-kodak.html">kodak
printer support</a>
<a
rel='nofollow' href="http://www.techsupportusa247.com/support-for-kodak.html">printer
support number 1-800-610-5648








<a rel='nofollow' href="http://www.techsupportusa247.com/support-for-magicjack.html"></a>Magic Support phone number<a rel='nofollow' href="http://www.techsupportusa247.com/support-for-magicjack.html"></a>Magic jack support <a rel='nofollow' href="http://www.techsupportusa247.com/support-for-magicjack.html"></a>magic Jack technical support

Ad

david hooton

Level 1:

An expert who has achieved level 1.

MVP:

An expert that gotĀ 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

  • Contributor 38 Answers
  • Posted on Nov 12, 2014
 david hooton
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that gotĀ 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Aug 18, 2011
Answers
38
Questions
0
Helped
7006
Points
81

5 Related Answers

Anonymous

  • 326 Answers
  • Posted on May 08, 2009

SOURCE: new ink cartridge but not printing green on esp 5 kodak all inone

you need to use the head cleaning tool in the printer properties, youll need to keep running it untill it runs clear and it uses alot of your ink while it does it.

youll find the cleaning option if you go to your
start/settings/printers and faxes, right click on your printer and go to printer preferences then maintinence

Ad

Anonymous

  • 295 Answers
  • Posted on Sep 21, 2009

SOURCE: Kodak esp 5 black ink not printing, have tied everything I can

Time to call kodak @ 1800 421 6699 and they will replace the printhead for you free of cost. Do not worry, it will resolve the issue and the printheads of kodak have been lasting longer nowadays as the technology has been improved.All the best.

Anonymous

  • 295 Answers
  • Posted on Jan 01, 2010

SOURCE: kodak esp 5 not printing properly and no yellow

Call Kodak @1800 421 6699 and get a new printhead free of cost.....Printhead has gone bad and it is the part in which we install the ink cartridges.It takes the ink out of the cartridges and spit the ink on the papers,...Cheers and Enjoy.

Anonymous

  • 15 Answers
  • Posted on Apr 17, 2010

SOURCE: My Kodak ESP 3 all-in-one printer will not print

you may try to clean the printhead and recalibrate the printer. if this will not correct the problem, you need to replace the printhead. I suggest contacting Kodak technical support to have a replacement printhead.

E Tipton

  • 4 Answers
  • Posted on Nov 20, 2012

SOURCE: Kodak ESP 3250 won't print black. Changed

I fixed my ESP 3250 print problems by removing the cartridges and print head. Using a Q-tip and warm water, added drops of water to each of the print head ink wells until the water / ink from the wells bled thru onto a cleanex. Did this several times. Dryed the print head fairly well. Then added a drop of water to each cartridge for each color. Reasembled and ran an alignment and to my surprise, it works! I hadn't used my printer in a while, so the ink had dryed on the felt for both the print head and cartridges.......

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to remove print head on a Kodak ESP 5250

If the ink cartridges and printhead are already in the printer, remove them, then reinstall them.
  1. Remove the color and black ink cartridges.
  2. Remove the existing printhead by lifting the latch in the center of the carriage. printhead_removal.jpg p342_0064aa.jpg ESP 3, 5, 7, 9, 3250, 5250, 5210,
    ESP Office 6150, 7250, 9250;
    HERO 7.1, 9.1, OFFICE HERO 6.1 ESP 1.2, 3.2, 3.2s, C110, C310, C315,
    ESP Office 2150, 2170;
    HERO 3.1, 5.1
  3. Close the printer access door.
0helpful
1answer

Kodak esp 5210 wont print black

I figured it out. If you are low on (25%) on either colors or black, then it won't print. Even if you load a new black cartridge and it reads as 100% black, it won't print because it will only print when BOTH cartridges have been replaced and reads 100%.
Same thing happens reversed with color being replaced.
So basically, ALL printers short you 25% ink and FORCE you to buy their ink more often. Kodak is no exception.
I have 100% black and 25% color and a BW only needed text paper won't print. I been through this before. *facepalm*
0helpful
1answer

My printer Esp 5210 sudden stopped prtinter properly. If I print an invoice on a letterhead, it prints the letterhead but not the saved text. If I use a pdf form it prints the text I have input but not the...

Print head needs replacing, appears to be a common problem with these Kodak printers, if new it should be covered under warrenty although good luck trying to get through to Kodak, I sent mine back in the end for a refund as long term print heads are expensive and they don't appear to last long
0helpful
1answer

I just bought a Kodak ESP 5210 and when it tried to calibrate after putting the ink cartridges in nothing comes out on the calibration page. Now when I try to print something, nothing is on the page. I...

Sounds like your print head needs replacing, exact same happened with me, appears to be a common problem with these Kodak printers, if new it should be covered under warrenty although good luck trying to get through to Kodak, I sent mine back in the end for a refund as long term print heads are around £65 each and they don't appear to last long
0helpful
1answer

I just installed a new Kodak ESP 5210 printer. It will not print out documents, it will copy and scan though.

OK, did you install the Easyshare software first before installing the printer? I've experienced technical problems with my Kodak camera when I do not have the Easyshare software installed.

Also, how did you install the Kodak ESP 5210 printer? Did you use the driver from the Kodak.com website, or the CD that came with it?

Good luck on getting the Kodak ESP 5210 printer to work on your computer system.
10helpful
2answers

Kodak esp 3250 won't print black. Changed cartridge and still won't print black. Just installed new printer.

I fixed my ESP 3250 print problems by removing the cartridges and print head. Using a Q-tip and warm water, added drops of water to each of the print head ink wells until the water / ink from the wells bled thru onto a cleanex. Did this several times. Dryed the print head fairly well. Then added a drop of water to each cartridge for each color. Reasembled and ran an alignment and to my surprise, it works! I hadn't used my printer in a while, so the ink had dryed on the felt for both the print head and cartridges.......
1helpful
3answers

How can I over ride my ink level tracker on the Kodak ESP 7 printer? The printer must be using a counter because I never print in color but my color cartridge keeps showing that it is going down. ...

The Kodak printers are designed in such a way so as to work with combination of Both color and black ink..In other printers,the prints are not that sharp,but In kodak printers color are awesome because even if we print black and white,the color from the color ink is also taken to give you those lifetime prints.Unfortunately There is no way to overcome this ink indicator.You cans et the preferences in the printer settings to print in black and white in your computer .
7helpful
2answers

ESP-7 won't print black ink

go to main menu,go to maintenance and then clean printhead go for deep cleaning .. and then caliberate printer from main menu.. ur printer will be working fine.. if not call kodak all in one printer support, they will replace ur printhead.free of cost
1helpful
1answer

Kodak ESP 5 runs out of ink after about 40 pages of standard text black & white documents. Also the color ink level is dropping, but no color is being used (the printer is set for black & white...

As far as the quantity of black & white - to get more out of it - go to start menu.. Click on on settings,, then printers,, Right click on the ESP 5,, click on printing preferences,, then clcik on draft,, then click on (at the top) advanced,, click on black & white.. Then click on apply then ok..
Now - every time you print it will be in this mode.. If you want to print in color - you will have to choose that each time..
For you black & white docs - this will print faster & use allot less ink..
As far as your color issue & puddling - It could be the printer head.. If it is new enough - call Kodak & maybe get a replacement.. If to old - maybe keep the color cartrige out and caped with the plastic caps until you need to print color.. Snap it in & out as needed..
I hope this helped..
7helpful
2answers

Kodak esp-3 cannot purge air from print head

WE HAVE AKODAK ESP-3 ALL IN ONE.
RAN OUT OF BLACK INK. HAVE REPLACED BLACK CARTRIDGE 2 TIMES BUT CANNOT GET BLACK TO PRINT. WHAT SHOULD I DO NEXT???
Not finding what you are looking for?

393 views

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...