How do i change the time and date?

Directions for Desk Clock - Without the C?/F? button

To change the Temperature:

Press the "S" button once (this will change from Fahrenheit to Celsius)

To change the Time and Date:

Press the "M" button once to change time to or from military time

Press the "S" button once to change the hour

Press the "S" button again to change the minute

Press the "S" button again to change the year

Changing the year will also change the day of the week

Press the "S" again to change the month

Press the "S" again to change the date

To set the Alarm:

Press the button with an alarm clock on it

Press the "S" button once

A flashing 12:00 should appear

Press the arrows to set the hour

Press the "S" button again to set the minutes

Press the "S" button again to change the "ring" of the alarm

There will ne a number below the time the alarm is set for

Use the arrows to advance through the options

To turn the alarm functions completely off:

Press the button with the alarm clock on it

Press the "S" button five times

When three dashes appear where the time would be, it is off.

Press the "M" button three times to get back to the main clock function

To clear the secondary clock:

You can set two different times on the clock, so if you travel frequently you can have a home time with alarm and a travel time with alarm saved and ready to go. There is a primary time, the one you normally see on the clock with an alarm clock function after it. There is also a secondary time with an alarm function after it.

Clearing the secondary clock will make it easier to know when you get back to the primary clock function.

Press the "M" button three times

Press the "S" button seven times

When three dashes appear where the time would be, it is off

Press the "M" button two more times

And you are Done!

Hello,
You did not specify the phone you using.

To set date and time on your nokia phone

Select Menu > Settings and Phone > Date and
time.
Select from the following:
Time - Enter the current time.
Time zone - Select your location.
Date - Enter the date.
Date format - Select the date format.
Date separator - Select the symbol that separates days, months, and years.
Time format - Select the time format.
Time separator - Select the symbol that separates hours and minutes.
Clock type - Select the clock type.
Clock alarm tone - Select the tone for the alarm clock.
Alarm snooze time - Adjust the snooze time.
Workdays - Select your working days. You can then set an alarm only for working day mornings, for example.
Automatic time update - To update the time,date, and time zone, select On. This network service may not be available on all networks.

Regards

hi jmonteiro and welcome to fixya,

Please make sure that your clock is set up properly. Go to time & date settings change the time, date and the am/pm mode. Usually, samsung phones used GMT for settling the time zone.
thanks and have a nice day

The DST schedule is hardwired into the older clocks and cannot be modified to run on the new schedule. If the clock has a DST switch, you can can turn it OFF and reset the clock only twice a year. On my old "ATOMIC" clock, I've set the DST function OFF, and I use the time zone switch for my adjustments. Sorry, but your only other choice is a new clock.

Bill B

ok mate its probly ur settings ave ya got it on manuel and if ya do dat wud probly be the problem switch it to auto update and time and that shud do it for ya tell us if it works for ya

Go into your phones menu, press applications, then press clock and there, your alarm menu is hiding. Hope this helps.

Hello,
A possible solution to this issue could be changing the automatic update of time and date. If it's currently switched on on your phone, try switching it off. And if it's already off try switching it off.
Here's where to find the setting: Menu >> Applications >> Clock >> Options >> Settings >> Automatic time update
For more info, check the (English) N79 manual on page 147

After selecting either TIME, DATE, or ALARM at the top of the screen, use the stylus to touch and hold the large time display. Hold it there for about 5 seconds and the clock will beep and the time display will start flashing. Then you can touch either the hours or minutes and it will increase by either 1 hour or 1 minute accordingly. When the DATE is selected, it shows the year in the large display. Again, holding the stylus on the year diaply for about 5 seconds will enter into the chqange mode. IN all cases, to exit the change mode simply select one of the other selections across the top: TIME, DATE, ALARM.

Hello everyone,
I finally found a manual that I hope that it will help you as much as it helped me. It took long enough. Here goes; try this site:
http://www.emersonradio.com/owners/SmartSet%20Series/

You have to use the feature 9 # from the administrators phone (usually extension 100)
Go to extension 100, press "feature,9,#" and you'll see the numbers on your display blinking like a digital alarm clock. Enter the time and then press feature to complete.