- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most likely the LCD inverter has gone bad. This is the part that provides power to the back-light of the display. In order to replace it, you'll have to get the part number of the LCD. Be aware, they used different LCD in the same size display. It will require removing the bezel and removing the screws that hold the LCD in place so you can get to the back to read the part number of the LCD. The inverter shouldn't cost that much, but if you have a shop do the repair, you're looking at $125-$175. good luck.
If this information was helpful, Please rate it high. thanks
You seem to have a issue with the Flex Ribbon Inside. The Display has a Flex ribbon that connects to the keypad area. there seems to be a fault with that ribbon. this is common problem with **** shell phones/ Slider phones.. best solution would be to take it to a repair shop. unless you have warranty.