Dishwashers Logo

Related Topics:

Sunni T Posted on May 16, 2017

Kitchenaid KUDP02SRSS1 Dishwasher We love this washer, but are having a problem. The cycle starts fine and then gets stuck at 44 minutes. It literally stays at 44 minutes for what seems like 10 minutes. Then it will stop and the dashes on ththe little display will just blink. I will open the door, hit start over and over again until it restarts. The only thing we have replaced in this has been the door spring and latch. Could it have anything to do with the door ? Or does it sound like something electronic??

2 Related Answers

Anonymous

  • 2 Answers
  • Posted on Jan 16, 2009

SOURCE: Kitchenaid dishwasher - door will not latch

The latch needs to be replaced. Kitchen Aid has made two updates to this latch. I.E. 2-revised latches. I just replacd the latch assembly and the dishwasher works fine now. Do a search for kitchen aid repair parts online and hav them shipped to your home. The repair takes five minutes. Un-screw all torx bit screws on door and the latch is under neath. One electrical dip switch held on by another screw and a two prong tab to undo the old latch. This seriously took me five minutes to repair and the parts were $40.00 online shipped.

Hope his helps.

Ad

Anonymous

  • 3 Answers
  • Posted on Feb 15, 2009

SOURCE: Dishwasher door won't open, latch seems broken

Hello, I read your comment. If the latch is broken, then I suggest first of all disconect the electricity from the dishwasher. You may want to try using a small screwdriver and insert it where the latch is to activate the opening mechanism. If it doesnt open, then there are two options, I suggest to call the technical service to replace the door with a new latch.

Hope I have been of help.

Regards Nevd ´ll fixya.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers
0helpful
1answer

KITCHENAID DISHWASHER STUCK IN WASH CYCLE

It can be the issue with defective float switch. The float switch may be hung up and this can cause the dishwasher to be stuck in a cycle. One more thing, if your dishwasher gets stuck in a cycle first try shutting off the breaker for at least 5 minutes if this does not correct the problem you will need to replace the timer / electronic control.
1helpful
1answer

Maytag dishwasher starts too easily and gets stuck in wash cycle

see this causes and fix it. God bless you

Float Switch

The float switch may be hung up and this can cause the dishwasher to be stuck in a cycle. Check the tutorial and the video for checking this part.

Timer / Control

If your dishwasher gets stuck in a cycle first try shutting off the breaker for at least 5 minutes if this does not correct the problem you will need to replace the timer / electronic control.
0helpful
1answer

Dishwasher timer gets stuck while washing

More then likely your Electric timer is hanging up do to a heater issue. Either a wire from the heater is bitten by a mouse or you have a bad. Heater element

I’m happy to help further over the phone at https://www.6ya.com/expert/george_106a9535a98aec8a

3helpful
1answer

My KitchenAid dishwasher (KUDS25SH) start and stop

MY KUDI25 CHWH1 has the exact same problem...I'd love to hear about a fix!
1helpful
2answers

My Whirlpool Caylpso display is stuck and will not start

You can try unplugging it for at least two hours and then re-starting. Since I moved my washer starting acting up getting stuck at various points in a cycle--sometimes 19 minutes, or 12, or 33, or 3...no rhyme or reason, no specific point in the cycle. My mover is an appliance repair guy and told me to do the unplug thing and it has worked multiple times--not that I enjoy having this happen over and over, but he told me Sears would charge a minimum of 100 to show up at the door, and I don't have that right now. Anyhow, it has only worked if I left it alone at least 2 hours---my new strategy is going to be unplugging it daily...I love the washer but this is nutty.
0helpful
2answers

Kitchenaid KAWS750JQ3 Top Load Washer

hi there,

make sure that the program is not on the "Intermittent Agitate Program". that would be the cause of the delay.

the other issue would be the timer itself. the timer is mechanical, so once the contact on it is corroded, it will only function intermitently or not at all.

please let me know if i can be of more help.

thanks
Not finding what you are looking for?

110 views

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...