I already check the Counter-> [Life] and reset some parts.
Did you replace them????? The machine uses the counter to determine certain voltage assignment to those parts so if you say you reset the drum counter to Zero then machine will assume it has a new drum and assign the required voltage for a new drum since its not a new drum because all you did is reset the counter with out replacing it ,you get bad copy issues codes and issues.
SOURCE: need to reset display counter/meter on a bizhub 750
If your are speaking of the total counter of the machine, the main counter when you press the "utility/counter" key this can not be reset except in the case of replacing the main board.
SOURCE: how to reset manualy the counter on epson d68
Manual instruction Resetter Printer Epson D68
Please rate my solution after reading. Thank you
SOURCE: how do you reset the life of the transfer unit on the Bizhub C250
Yes,
Remove Trasfert belt unit.
On the left handled remove one screw ( spring fixer) and remove right srew (over the belt / bar whit finger fixee).
Remove, on the left spring stoppage and metal handled.
Remove black little srew and take to hand fuse contact.
Change fuse (behind) with new identical fuse and reassembly.
It may be reset trasfert belt counter.
Sorry for my not good english.
Bye.
SOURCE: How to reset waist ink counter
help me
i have epson stylus photo r290 printer
its showing
Parts inside your printer are at the end of their service life. See your printer documentation
plz help me
my id is
[email protected]
SOURCE: reset lamp life counter pt-50dl54j
To reset the lamp timer, turn the TV on first. Now hold VOL DOWN on the TV and MUTE on the remote until a message appears on the screen about the lamp timer being reset. Make sure the remote is pointed toward the TV to receive the signal.
402 views
Usually answered in minutes!
×