How do I take off day light savings time

just put the hour hand forward or back 1 hour

one more, time( posted 10 times)
the operators guide cover this. lost it>?
it says, and i parahraze.
1: day one put the green code card in you dresser.. saved.
2: ask the radio your code, write it day1 in the operators manual (lost)
3: then it says, if lost,(not reading book) go to dealer with the radio serial number.

here it it is, 100 times more posted.
http://justgivemethedamnmanual.com/honda/honda-cr-v-owners-manuals/

it has to be the battery contacts, the motherboard is loosing contact with the battery which is why it keeps resetting itself

It won't understand. It was mfg before the new change

I forund a solution at http://www.emersonelectronics.ca/emerson/en/product/view/14383

http://www.lacrossetechnology.com/2171/manual.pdf

Simple to fix

Check in the instructions about the time zone setting and that the feature for auto day light savings are turned on.

If you go to the manufacture site for many of these watches, they have downloadable PDF instructions. They also have service centers that can give support.

Jerry G.

I have the same problem exactly and am in the Easter time zone too, so have not other solution.

I picked this up from the Emerson Website Read below before going to the link. Try thi link: and poke around the website http://www.fox-international.com/emerson/ Important Notice About Daylight Saving Time (DST) and Emerson SmartSet® Clocks and Clock Radios Congress recently passed a new Energy Bill which includes a provision to extend Daylight Savings Time. At the beginning of 2007, Daylight Savings time will begin on the second Sunday in March and end on the first Sunday in November. Because of this change your SmartSet® Clock or Clock Radio will need to be updated. In order to set your unit we will need the following information from you: 1. Model Number You can find your model number on the back or bottom of your unit. (Click here for an example) 2. Serial Number You can find your serial number on the back or bottom of your unit. (Click here for an example) Based on this information we can identify which setting is necessary to adjust your unit for compliance with day light savings. There are three possible groups your SmartSet® Clock or Clock Radio could fall into: Group One changes the time zone to a previous time zone. Group Two adjusts for the spring and fall settings. Group Three is already set for 2007 daylight savings compliance. Group identification begins with your serial number. The first three to four digits of the serial number represent the year and month of manufacture. (If your serial number begins with 0607, that would indicate July 2006, 506 would indicate June 2005.) Models manufactured before January 2006 (serial number 506, 512, etc.) will follow Group One settings. Models manufactured between January 2006 and July 2006 (serial number 0601, 0603, etc.) will follow Group Two settings. Models manufactured after July 2006 (serial numbers beginning with 0608) are Group Three and do not require any changes. If you believe you have a Group One model, please click here. If you believe you have a Group Two model, please click here. If you cannot determine which Group your model may be in, please call us at 1-800-526-7521.