Re: Emptied the ice bin for a party and now it does not...
Flip the wire bail down on the icemaker. It is the on-off switch control for the ice maker. When ice is manually removed the bail is normally pushed up into the off position during removal.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When the ice bin fills up, it won't let the arm all the way down. The arm must go down for more ice to drop into bin. Sometimes an ice cube or two will get caught under the arm and prevent it from cycling. Continuing to use the ice maker will empty bin but no new ice is made. Clear any ice cubes from under the arm and the cycle will start again. My ice maker takes about twelve hours to fill after it has been emptied but ice from the door is available almost imediately.
This is caused by air leaking past the seal in the shut door. Push in on the paddle and release and watch the door shut close. It should make an air tight seal. You can also shine a flashlight in the shut and look at the opposite side to look for light.
If you wish to get some details about refrigerator repair then check the following link ; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
Try swapping the wires on the dual water inlet valve. Then
try the water dispenser. The water should go to the ice maker. This will tell
you weather or not the ice maker valve is working and if the line is clear.
There is a metal wire that gets pushed up when the Ice becomes too full and turns off the ice maker. You can pull it back down with you hand and that will unlock it and turn the ice maker back on.
enoty and wash out the ice bin with hot water and let air dry, before you reinstall the ice bin
Be sure to turn off the ice maker so it will not make ice while the ben is out of the ref
check for right direction on the filter,check the water intake solenoid valve.water presure.check that the bin is seated properly and all interlock switches are closed and working.
×