Some dvd is coping but some is not copy displayed 0 session.solve

What are you playing back, and what can the receiving unit cope with?

If you're playing back 24/96, your receiving unit MUST be able to cope with this. If the receiving unit can only cope with 16/44 or 16/48, you're doomed to fail.

The CD may be an "overburned" CD, which is longer than your typical CD's length, which would display the the Overflow warning message.

We can solve this problem by holding down the ESC button for 2 seconds, and then accessing the Advanced Setup menu. Under the Advanced Setup Menu, there is a function called "Overburn", which will enable the copying of overburned CDs.

If you still have problems, questions or concerns, please feel free to contact us @ 877-686-8868 x208 for technical support. Thank you and have a nice day.

EZ Dupe Technical Support

Sometimes when you record to a high quality setting using VHS material the system cannot cope. You could try a lower setting. Try the SVHS setting if it has one. You need to have plenty of memory to record video too. Avoid having any other programs running at the same time as you are recording.

I seem to recall lots of people having problems with Disney DVD/Tapes due to Macrovision. It could be to do with that, as your machine is a recorder. So it might be having a job coping with the copy protection system of these DVD's.
If it has never played Disney DVD's you could get in touch with Samsung, explain what I have said and your problem, they might solve your problem for free, if your not under guarantee.

HELLO

Turn on your DVD Player

Press OPEN on remote

Press 1 3 7 9 and the number of the region you want to use between 0 and 6. Use 0 for region free. You may need to press these buttons slowly. You will see XXXX on the TV. When you press the last number, it will display at the top left of the screen.

Now insert a disc (other than your own region) into the player and close it. It should load and play. Other region discs should play as well. If you didn't do it correctly it will display "Wrong Region".

When you turn off the DVD player it will keep the settings.

HOPE THIS HELPS ENJOY (:-)

Hello sir; your machine temperatur too high need to reset the procedur as follow;
1, press "stop/clear" key, "start" key", and left copy density key.
2, press "stop/clear" key again.
3, enter U163 press "start".
4, when screen display "CLE" then press "start" again to reset.

It looks like from error codes that yoi may have a hardware error, or a disk format problem, if this is only burning problem you have on pc and it worked before, then uninstall and reinstall Nero, info gathered from here,
http://www.isobuster.com/help.php?help=305
sense code 5 ASC 2c= 5 / 2C / 00 COMMAND SEQUENCE ERROR
5ASC2700=5 / 27 / 00 WRITE PROTECTED
Please give good rating if this helps you or points you in right direction, thanks

Try the following which i managed to get from POWER ACOUSTIK technical support:

Multi-region for PTID4006T, 406T, 4005, 405, 8006T, 8004, 4003, 5000, 5800, 5300, 530.

1. Turn the unit on and insert a DVD disc. The unit will display LOADING.

2. While the DVD player is LOADING press the following keys:
SET-UP, then press 0, 0, 0, 0 key (0 four times), then ARROW DOWN key (to change the zone to region all 0), then BAND/ENTER key and SET-UP

3. To finish the procedure, push the EJECT key. The disc will eject... Wait and the DVD disc will re-load and play.